Programming special functions
7. Buzzer
A buzzer (30 secs) can be set for the following functions:
–End of program = Buzzer constantly
–Error = Buzzer sounds every other second
^Turn the program selector to "STOP".
^Turn the machine off.
^Press and hold the "Display" and "Start" buttons, at the same time turn the machine on with the "On / Off" button.
The display shows the current program status "P...".
The "Fill/Drain" indicator lights.
^Press the "Extra Drying" button once. "E01" (programming level 1) is displayed.
^Turn the program selector to "Intensive".
The display shows a figure between "90" and "93".
"90" = Buzzer turned off "91" = End of program "92" = Fault
"93" = All functions / End of program / Fault (default)
^Press "Display" until the desired function is displayed.
^Press the "Start" button. "SP" is displayed.
^Press the "Start" button again. The change has been saved.
Value set:
35