Installation
Leveling the machine
Any unevenness in the floor can be compensated for.
^Adjust the four screw feet to raise or lower the height of the machine.
Position and secure the machine
To ensure stability the machine must first be aligned and then screwed to the countertop.
^Open the door.
^Through each of the two holes in the front trim, left and right, screw the machine to the front edge of the continuous countertop.
^Do not use silicone sealant to seal the gaps between the machine and any neighboring units, this would hinder ventilation to the circulation pump.
Stainless steel toe kick
A stainless steel toe kick is included for easing undercounter installations. Please refer to installation directions included with the toe kick.
Depending on the requirements for installation, the following "kits" can be ordered from the Miele.
Cover plate (protects the countertop)
The underside of the countertop is protected from steam damage by a "niro" stainless steel plate.
48