Miele G 7856, 06 868 521 installation instructions Adding cleaning agent

Page 22
Adding cleaning agent

Adding cleaning agent

,Only use cleaning agents formulated for this machine.

Do not use detergents formulated for domestic dishwashers.

Powder cleaning agent is dispensed via the compartment for powder cleaning agents in the door.

Liquid cleaning agents are dispensed via the DOS-Module (available as an optional accessory).

If liquid cleaning agent is not being used, powder detergent must be placed in the detergent container prior to every program (with the exception of "Rapid" and "Rinse"). See the "Program guide" for more information.

^Press the opening catch in the direction of the arrow. The flap will spring open. The flap is always open at the end of a program.

^Add powder cleaning agent to compartment II.

Dosage: approx. 3 g/l, it is equivalent to 1 ½ tablespoons (20 g) per program cycle.

In the program cycle "Wash" the water intake is approx. 7 l.

Follow manufacturer's instructions if they differ.

^Close the dispenser lid.

22

Image 22
Contents Commercial Dishwasher G Operating and Installation Instructionsen - US Page Contents IMPORTANT SAFETY INSTRUCTIONS Installation and serviceIMPORTANT SAFETY INSTRUCTIONS components of the machine Disposal of the old machine AccessoriesSAVE THESE INSTRUCTIONS b Filter combination Guide to the machinelocated on the rear side of the machine c Salt reservoir water softenera On/Off button I-0 b Door button cDisplay Description of the machine To open the door Opening and closing the doorTo close the door Water softener Setting the water softenerWater Softener Table of settings factory settingFilling the salt reservoir Salt indicator Rinse aid Adding rinse aidSetting the dosage Loading the machine Loading the machinePlease note Items not suitable for dishwashersOur recommendations Cutlery Upper basketBottom basket Loading examplesAdjusting the upper basket To adjust the upper basketAdding cleaning agent Rapid program Maintenance of the dispensing systemsEvery 12-18months Turning on Starting a programAt the end of a program Selecting an additional functionProgram sequence display Turning offCanceling a program Changing a programProgram Program guideWhen to use Program cycleNORMAL Programming special functions 2. Selecting a second interim rinseVenting the dispensing system Setting the dosage Having changed a value or all valuesTemperature holding time Main wash Temperature holding time Final rinse Having changed a value or all valuesb Setting the delay start period 6.Delay start and setting the delay start timea To activate Delay Start 7. Buzzer Programming special functions Machine care Filter combinationCleaning the spray arms Cleaning the non-returnvalve and drain pump Cleaning the front of the machine Cleaning the filters in the water inletCleaning the control panel To clean the filtersCorrecting minor faults Faults / possible causesRemove the cause of the fault After Sales Service Page Installation Instructions Disposal of the packing material Caring for the environmentDisposal of the appliance Installation options -Free-standing -Undercounter InstallationOpen the door Stainless steel toe kick Leveling the machinePosition and secure the machine Cover plate protects the countertopTHIS APPLIANCE MUST BE GROUNDED Electrical connectionPLEASE NOTE Isolate the machine from the power supply Plumbing Connection to the water inletDrainage English Technical dataMetric Page Page All rights reserved M.-Nr.06