Programming special functions
5.Altering the cleaning temperature and/or the temperature holding time in the "Main Wash" and "Final rinse"stage of the program cycle
Any changes to the wash temperature and/or the temperature holding time should be recorded in the program chart.
The main wash and final rinse temperatures can be changed from 86°F - 158°F (30 °C - 70 °C) and the temperature holding time from
1 - 10 mins.
Important: To wash dishes with soiling, program to 140°F (60°C).
^Turn the program selector to "STOP". The programming level is displayed in this position only.
^Turn the machine off.
^Press and hold the "Display" and "Start" buttons, and at the same time turn the machine on with the "On / Off" button.
The displays shows the current program status "P...".
The "Fill/Drain" indicator lights.
^Temperature "Main wash": Press "Extra Drying" three times. "E03" (programming level 3) is displayed.
^Turn the program selector to the program to be changed. The current value is displayed after °F.
^Press and hold "Display" until the desired value is displayed.
^Temperature holding time "Main wash":
Turn the program selector to the "STOP" position (the programming level is displayed in this position only).
^Press "Extra Drying" again. "E04" (programming level 4) is displayed.
^Turn the program selector to the program to be changed. The current value is displayed after min.
^Press "Display" until the required value is displayed.
32