Miele 06 868 521, G 7856 installation instructions Program guide, When to use, Program cycle

Program guide

Program	When to use			Program cycle
		Pre-		Main	Interim			Final	Drying
		wash		wash		rinse		rinse	(Option.
				1)				1)	funct.)
							33)
		1	2		1	2
CHINA +	For temperature sensitive glassware			X		X (X)		X	(X)
CRYSTAL	and lightly soiled dishware.
	Run-time: ~ 12 minutes*
120°F
	(plus 10 minutes for optional drying)
RAPID	Rapid program for continuously used			X	(X)2)			X **)
130°F	dishes.**)
	Powder detergent: Place detergent
	directly on the right hand side of the
	door interior, NOT in the detergent cup.
	Run-time: ~ 10 minutes*
SHORT	Quick program for lightly soiled	X					(X)	X	(X)
130°F	dishware, e.g. party dishware or to
	remove salt traces from the wash
	cabinet after refilling salt.
	Run-time: ~ 15 minutes*
	(plus 10 minutes for optional drying)

Powder detergent dosage: 1 ½ tablespoons (20 grams) in the detergent dispenser. Follow manufacturers instructions if they differ.

*) Run times dependent on incoming water pressure and temperatures

**) Important information for the "Rapid" program

At the end of the program, the final rinse water is not drained away. It is used for the following "Rapid" program as wash water. If the operation is interrupted for a longer time or another program is desired:

^Select the program "DRAIN". The final rinse water is drained away.

X = Sections included in the program (with temperature/temperature holding time)

1)Temperature or temperature holding time adjustment (see "Programming special functions").

Important: To clean dishes with soiling it is recommended to program a wash temperature of 140°F (60°C).

2)To select an economy interim rinse see "Programming special functions".

3)To select a second interim rinse see "Programming special functions".

27