Miele G 7856, 06 868 521 Programming special functions, Venting the dispensing system

Page 30
Venting the dispensing system:

Programming special functions

3.Selecting an economy interim rinse (only for "Rapid" program)

^Turn the program selector to "STOP".

^Turn the machine off.

^Press and hold the "Display" and "Start" buttons, at the same time turn the machine on with the "On / Off" button.

The display shows the current program status "P...".

The "Fill/Drain" indicator lights.

^Press the "Extra Drying" button once. "E01" (programming level 1) is displayed.

^Turn the program selector to "Rinse". "40" or "41" is displayed.

"40" = without economy interim rinse "41" = with economy interim rinse

^Press "Display" to change from "40" to "41" or vice versa.

^Press the "Start" button. "SP" is displayed.

^Press the "Start" button again. The change has been saved.

Value set:

4.Venting and setting the dosage on "DOS modules G 60 and C 60" (optional extra)

^Set the dosage selector on the DOS-Module to the "10" position (on DOS Module C 60 only).

^Turn the program selector to "STOP".

^Turn the machine off.

^Press and hold the "Display" and "Start" buttons, at the same time turn the machine on with the "On / Off" button.

The display shows the current program status "P...".

The "Fill/Drain" indicator lights.

^Press "Extra Drying" twice. "E02" (programming level 2) is displayed.

Venting the dispensing system:

^Turn the program selector to "Rinse". "do1" is displayed.

^Press "Display" for 90 secs. The dosage system is vented.

If only venting is required:

^Turn the machine off with On / Off (I-0) button.

Immediately: Start the "Rinse" program, so that after venting any agents in the wash cabinet are diluted before being drained away.

30

Image 30
Contents Operating and Installation Instructions Commercial Dishwasher Gen - US Page Contents IMPORTANT SAFETY INSTRUCTIONS Installation and serviceIMPORTANT SAFETY INSTRUCTIONS components of the machine Accessories Disposal of the old machineSAVE THESE INSTRUCTIONS b Filter combination Guide to the machinelocated on the rear side of the machine c Salt reservoir water softenera On/Off button I-0 b Door button cDisplay Description of the machine Opening and closing the door To open the doorTo close the door Setting the water softener Water softenerWater Softener Table of settings factory settingFilling the salt reservoir Salt indicator Rinse aid Adding rinse aidSetting the dosage Loading the machine Loading the machineItems not suitable for dishwashers Please noteOur recommendations Cutlery Upper basketBottom basket Loading examplesAdjusting the upper basket To adjust the upper basketAdding cleaning agent Maintenance of the dispensing systems Rapid programEvery 12-18months Turning on Starting a programAt the end of a program Selecting an additional functionProgram sequence display Turning offCanceling a program Changing a programProgram Program guideWhen to use Program cycleNORMAL Programming special functions 2. Selecting a second interim rinseVenting the dispensing system Setting the dosage Having changed a value or all valuesTemperature holding time Main wash Temperature holding time Final rinse Having changed a value or all values6.Delay start and setting the delay start time b Setting the delay start perioda To activate Delay Start 7. Buzzer Programming special functions Machine care Filter combinationCleaning the spray arms Cleaning the non-returnvalve and drain pump Cleaning the front of the machine Cleaning the filters in the water inletCleaning the control panel To clean the filtersCorrecting minor faults Faults / possible causesRemove the cause of the fault After Sales Service Page Installation Instructions Caring for the environment Disposal of the packing materialDisposal of the appliance Installation Installation options -Free-standing -UndercounterOpen the door Stainless steel toe kick Leveling the machinePosition and secure the machine Cover plate protects the countertopElectrical connection THIS APPLIANCE MUST BE GROUNDEDPLEASE NOTE Isolate the machine from the power supply Plumbing Connection to the water inletDrainage Technical data EnglishMetric Page Page All rights reserved M.-Nr.06