Installation
Please refer to the installation diagram supplied with the machine.
,Furniture and fittings installed near the machine must be of a commercial standard, able to withstand the effects of steam and condensed water.
Installation options
–
–Undercounter
The machine should be positioned under a continuous worktop or sink drainer.
The opening must be at least 23 5/8" (60 cm) wide, 23 5/8" (60 cm) deep and 34 1/4" (82 cm) high.
If necessary, the machine lid can be removed as follows:
^ Open the door. |
^Remove the fixing screws on both sides using a Phillips screwdriver.
^Pull the machine lid approx. ¼" (5 mm) forwards, lift and remove.
47