GE ZHU30 Using Your Cooktop, Power sharing, Low setting, Important Note for Four Burner Models

Page 15

 

 

Using Your Cooktop

 

 

Induction Cooktop

Power sharing

Four burner cooktops are divided into two

 

 

separate heating zones. The right and left side

 

 

cooking zones are powered by separate and

 

 

independent induction generators. One generator

 

 

controls 2 elements, or two cooking zones within

 

 

a heating section share the power of one

 

 

generator.

 

 

Five burner cooktops are divided into 3 zones.

 

 

The right and left side have separate cooking

 

 

zones and the large center element is another

 

 

separate cooking zone.

 

 

Power Sharing is activated when both elements

4 burner cooktops with right and left side (2)

 

in the same cooking zone are activated and one

 

element is set for Boost (H). The element that is

induction generators.

 

 

 

not set for Boost will change to a lower power

 

 

level. This is called Power Sharing. When Boost

 

 

operation is complete (10 minutes), the other

 

 

element may be reset to any power level. Both

 

 

elements can operate simultaneously at normal

 

 

power level settings of “L” to 9.

 

 

IMPORTANT NOTE FOR FOUR BURNER

 

 

MODELS:

 

 

The elements on the right side share one

 

 

generator. Both elements can operate at any

 

 

non-Boost (level L to 9) power level at the same

 

 

time. If the large front element is set for “H” or

5 burner cooktops with right, left and center (3)

 

Boost, the smaller element at the right rear will

 

be deactivated or turned off automatically. The

induction generators.

 

 

 

smaller right rear element can be activated and

 

 

set for any power level after the Boost operation

 

 

of the larger element is completed (10 minutes).

 

Using the

1 Place a pan with food onto the induction element.

 

low setting

The pan size should match the indicator ring.

 

2 Touch the ON/OFF pad. “5” will flash in the display.

 

 

 

 

3 Touch the (-)pad until the display reads “L.” A

 

 

sound will beep.

 

 

Do not use plastic wrap to cover food. Plastic may

 

 

melt onto the surface and be very difficult to remove.

 

 

Use only cookware recommended for this cooktop.

CAUTION: Do not warm food on the “L”

 

The Low setting will keep hot, cooked food at serving

 

power level for more than two hours.

 

temperature. Always start with hot food. Do not use

 

 

 

to heat cold food.

 

 

Placing uncooked or cold food on surface element

 

 

set for Low could result in food-borne illness.

 

 

For best results, all food set for Low should be

 

 

covered with a lid or aluminum foil. Pastries or breads

 

 

should be vented to allow moisture to escape.

 

 

Always use pot holders or oven mitts when removing

 

 

food from the element set for Low as cookware and

 

 

plates will be hot.

 

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents 49-80509 For ModelsPour à la Modèles Para ModelosWrite down the model & serial numbers ContentsBefore using your cooktop IntroductionIf you need service Helpful hints on how to use and maintain yourIf you received a damaged cooktop Save time & money Important Safety Instructions Safety Precautions Always heat fat slowly, and watch as it heats Induction Surface Elements Features Features of Your CooktopZHU36 36″ Induction Cooktop ZHU30 30″ Induction Cooktop FeaturesUsing Your Cooktop Using the correct size cookwareHow induction cooking works Correct Using the cookware correctlyFor best results Choosing cookwareWith an element control on Touch controlCooking elements To turn on a cooking elementFlashing F in display Boost settingPower level settings To start the Boost power settingLow setting Using Your CooktopPower sharing UsingWill flash Using the kitchen timer Hot surface indicator lightTo unlock the cooktop Error alerts Flashing E/c and E oControl lock To lock the cooktopUsing a pressure canner, Observe Following points in canningOn any cooktop surface element if your canner is not flat Control lock pad Care and CleaningNormal daily cleaning How to remove protective shipping film and packaging tapeHeavy burned-on residue Burned-on residueGlass surface- potential for permanent damage Care and CleaningMetal marks ScratchesQuestions? Before you call for service… Before You Call For ServiceAlternating to o Display Flashing EAlone no Other Letter Display Flashing E Alternating to cInduction Cooktop Registration Ownership Product Consumer Consumer Product Ownership Registration Ownership Registration Page In-Home Repair Service Consumer ServicesFrom the Date Original Purchase WarrantyInformation de consommateur Table des matièresAvant d’utiliser votre table de cuisson Si vous avez besoin d’une intervention Si vous recevez une table de cuisson endommagéeÉconomisez du temps et de l’argent Augmentez la distance entre l’appareil et le récepteur Consignes DE Sécurité ImportantesMesures DE Sécurité Proximité de cet appareil ou d’un autre Éléments DE Surface À Induction ZHU36 Table de cuisson de Caractéristiques de votre table de cuissonZHU30 Table de cuisson de CaractéristiquesFonctionnement de la cuisson à induction Utilisation de votre table de cuissonLa taille correcte Utilisation d’une batterie de cuisineRecommandations sur la batterie de cuisine Batterie de cuisine adaptée Pour de meilleurs résultatsLorsqu’un élément est activé sur on Utilisation des commandes à toucheÉléments de cuisson Pour mettre en marche un élément de cuissonPour activer le niveau de puissance renforcée Réglage du niveau de puissance« F » s’affiche en clignotant Puissance renforcéeUtilisation du niveau basse température « L » Partage de puissanceRemarque Importante Pour LES Modèles À Quatre Brûleurs Utilisation de votre table de cuisson Verrouillage des commandes « E » / « c » et « E » / « o »Messages d’erreur Correct Incorrect Respectez les points suivants pour faire des conservesEt le ruban d’emballage Touche de verrouillage des commandesNettoyage et entretien Nettoyage normal quotidienLaissez refroidir la table de cuisson Résidus CalcinésRésidus Calcinés difficiles à enleverSurface de CommanderNettoyage et entretien Et rayuresAvant de contacter le service Affichage D’UN « E » Alternant Avec UN « C »Alternant Avec UN « O » Ownership Registration Page Pour les clients avec des besoins spéciaux… Service au consommateurGarantie Partir de la date d’achat originaleDe la Justice Antes de usar su anafe Información para el consumidorIntroducción ContenidosSi usted recibió un anafe dañado Ahorre tiempo y dinero Información para el consumidorSi necesita servicio técnico ¡ADVERTENCIA Precauciones DE Seguridad Limpie sólo las partes listadas en el Manual del propietario Elementos DE Superficie DE Inducción Características Características de su anafeZHU36 Anafes de ZHU30 Anafes de 30″ CaracterísticasCómo usar el tamaño correcto Cómo usar su anafeDe recipiente Cómo funciona la cocción por inducciónDe cerámica Cómo elegir el mejor recipiente de cocciónRecipientes de cocción adecuados Para mejores resultadosCómo usar los controles táctiles Elementos de cocción Para encender un elemento de cocciónCon un control de elemento encendido on En la De nivel deEnergía Destella FDistribución de energía Cómo usar la configuración baja LLuz indicadora de superficie caliente Cómo usar el temporizador de cocinaPara desbloquear el anafe Alertas de error destello de E/c y E oBloqueo de control Para bloquear el anafe¡Correcto ¡Incorrecto Cuidado y limpieza Almohadilla de bloqueo de controlLimpieza normal de uso diario Residuos pegados rebeldes Residuos pegadosPara solicitar repuestos Cuidado y limpiezaMarcas de metal y rayones Superficie de vidrio posibilidades de daño permanentePreguntas? Antes de llamar al servicio técnico Antes de llamar al servicio técnicoSolo Ninguna Otra Letra LA Pantalla Destella Alternando CON cAlternando CON o 800.444.1845 Servicios al consumidorDesde la fecha de compra original Garantía

ZHU30, ZHU36 specifications

The GE ZHU36 and ZHU30 are part of General Electric's extensive range of locomotive models that cater to various operational requirements in freight and passenger transportation. These locomotives symbolize innovation in rail technology and efficiency, making them essential components of contemporary rail systems.

Starting with the GE ZHU36, this model is well-known for its impressive power output, typically around 3,600 horsepower. It is engineered to operate effectively on both passenger and freight services, showcasing its versatility. One distinct feature of the ZHU36 is its advanced traction control system, which enhances traction and provides better performance on diverse track conditions. This technology ensures that the locomotive can handle challenging gradients and adverse weather conditions, making it suitable for regions with varying geographies.

In addition to its robust power, the ZHU36 employs an environmentally conscious approach, adhering to strict emissions regulations. It utilizes low-emission engines that reduce the carbon footprint associated with locomotive operations. Coupled with a sophisticated braking system, it guarantees safe and efficient stopping capabilities, enhancing overall operational safety.

On the other hand, the GE ZHU30 serves as a lighter alternative, typically generating around 3,000 horsepower. This locomotive is particularly effective for medium-haul freight services, where flexibility is paramount. The ZHU30 features similar traction control technology as its counterpart, optimized for its lighter design, which allows for efficient fuel consumption without compromising on performance.

Both models are equipped with advanced diagnostic systems that provide real-time data about their operational status. This technology enables operators to monitor performance metrics, identify potential issues, and optimize maintenance schedules, thereby reducing downtime and enhancing productivity.

The ZHU locomotives are built with modularity in mind, allowing for various configurations to suit different rail operations. They are designed for ease of maintenance, featuring accessible components that minimize service time and labor costs. This adaptability and focus on maintainability underscore GE's commitment to providing reliable and efficient rail solutions.

In summary, the GE ZHU36 and ZHU30 bring advanced technologies and powerful performance to the rail industry. Their combination of eco-friendly features, robust capabilities, and easy maintenance positions them as leading options for operators seeking to enhance their rail services in a competitive landscape.
Top Page Image Contents