Safety Instructions
About the shelves and bins.
Not all features are on all models.
Spillproof Shelves (on some models)
Spillproof shelves have special edges to help prevent spills from dripping to lower shelves. To remove or replace the shelves,
see Rearranging the Shelves.
Slide-Out Spillproof Shelf (on some models)
Instructions Operating Instructions
Tab
Opening
Front bar
The
NOTE: The shelves are shipped with tape on the back. Remove this tape before attempting to remove the shelf.
To remove:
Remove all items from shelf.
Slide the shelf out until it stops.
Lift the front edge of the shelf until the tabs are above the shelf frame.
Continue pulling the shelf forward until it can be lifted out and removed.
To replace:
Place the rear of the shelf on the shelf frame just behind the front bar.
Slide the shelf back until the tabs are above the openings.
Lower the shelf so that the tabs go into the openings; then slide the shelf all the way in.
Make sure that the shelf sits flat after reinstallation and doesn’t move freely from side to side.
Make sure you push the shelves all the way in before you close the door.
Installation
Adjustable Bins on the Door (on some models)
Troubleshooting Tips
Adjustable bins can easily be carried from refrigerator to work area.
To remove:
Lift bin straight up; then pull out.
To replace or relocate:
Engage the bin in the molded supports of the door and push down. Bin will lock in place.
NOTE: Bins for the refrigerator and freezer doors are different sizes and are not interchangeable.
Consumer Support
Non-Adjustable Shelves on the Door
Detachable shelves deepen and enclose fixed door shelves, providing more storage room and greater storage flexibility.
To remove:
Lift the shelf straight up; then pull out.
To replace:
Engage the shelf extender in the molded supports on the door and push down.
It will lock in place.
8