Aiwa LCX-350 manual Programmed Edit Recording, Press the numbered buttons to program a track

Page 15

PROGRAMMED EDIT

RECORDING

3,7 4,5

3,7 4 m

8

FUNCTION

Programmed edit function enables CD recording while checking the remaining time on each side of the tape as the tracks are programmed.

m

The programmed edit recording will not start from a point halfway in the tape. The tape must be recorded from the beginning of either side.

Use the remote control from steps 3 to 8

1 Insert the tape into the deck.

Insert the tape with the side to be recorded on first facing out from the unit,

2 Press the CD button on the main unit so that “CD” is displayed, and load the disc.

You can press the FUNCTION button on the remote control

repeatedly to display “CD,”

3 Press the EDIT/CHECK button twice while pressing the SHIFT button.

4 Press the numbered buttons to designate the tape length.

10 to 99 minutes can be specified.

Example: When using a 60-minute tape, press the 6 and O

buttons.

●The 44 and - buttons are also available to designate the tape length.

5 Press the numbered buttons to program a track.

Example: To select the 10th track, press the numbered buttons

+10 and O.

6 Repeat step 5 for the rest of the tracks for side A.

A track whose playing time is longer than the remaining time

cannot be programmed.

Selected track Program

numbernumber

Remaining time of side A Programmed tracks

7 Press the EDIT/CHECK button while pressing the SHIFT button to select side B and program the tracks for side B.

After confirming B on the display, repeat step 5.

Tape side B (reverse side)

I

8 Press the O button and then press the> button

 

within 2 seconds to start recording.

m

The tape is rewound to the beginning of the front side, the lead segment is played through for 10 seconds, and recording starts. When recording on the front side (A) ends, recording on the back side (B) starts.

To stop recording

Press the ❑ button, Recording and CD play stop simultaneously.

To check the order of the programmed track numbers

Before recording, press the EDIT/CHECK button while pressing the SHIFT button to select side A or B, and press the EP button repeatedly.

Track number Program number

Programmed tracks

To change the program of each side

Press the EDIT/CHECK button while pressing the SHIFT blJtton to select side A or B, and press the ■ button to clear the program of the selected side. Then program tracks again.

To clear the edit program

Press the ❑ button twice.

m

Recording is inhibited if the erasure prevention tab on either side of the tape is broken off.

ENGLISH 14

Page 14 Page 16
Image 15
Page 14 Page 16
Contents IlBEiE Precautions Table of Contents Connect the supplied antennas Elefcwe connecting the AC cordConnections ’ Connect the speaker cords to the main unitRemote Control Connecting AN Outdoor AntennaPress the 11 button Setting the ClockBefore Operation =-=2+5=-=4Graphic Equalizer Adjusting the SoundSound Adjustment During Recording Enhancing the Bass SoundPress the q or button to select a station Manual TuningWhen an FM stereo broadcast contains Inoise To change the AM tuning intervalPresetting Stations Preset Number TuningRepeat steps 1 Random Play OperationLoading Disc Playing DiscProgrammed Play Repeat PlayPlaying Back a Tape Inserting TapesInsert the tape to be recorded on into the deck Press theTAPE button to select the reverse modeBasic Recording Inserting Blank SpacesInsert the tape into the deck Al Edit RecordingTo stop recording Programmed Edit RecordingPress the numbered buttons to program a track Repeat for the rest of the tracks for side aSetting the Timer Timer RecordingPrepare the source Setting the Sleep Timer To check the time remaining until the power is turned OffTo cancel the sleep timer Press the AUX button Connecting OptionalEquipmentsources DC JACK12VCare of tapes Care and MaintenanceTo clean the heads and tape paths Care of discsCassette deck section SpecificationsParts Index Troubleshooting GuideAdvertencia PrecaucionesNdice Conecte el cable de CA a una toma de CA ConexionesConecte Ios cables del altavoz a la unidad principal Conecte Ias antenas suministradasControl Remoto Conexion DE UNA Antena ExteriorPresione el boton Antes DE LA OperacionAjuste DEL Reloj =============Awste DEL Sonido Para cambiar el intervalo de sintonizacion de AM Sintonizacion ManualPresione el boton 4 0 para seleccionar una emisora Cuando una emision en FM estereo contenga ruidloSeleccion de un rmumero de preajuste en la unidad principal Preajuste DE EmisorasSINTONIZAC16N Mediante Numero DE Repita Ios pasos 1 yReproduction Aleatoria OperacionIntroduction DE UN Disco Reproduction DE UN DiscoReproduction Programada Repeticion DE LA ReproductionPara poner el contador de cinta a OPERACIOhlInsercion DE Cintas Reproduction DE UNA CintaPresione el boton @ para iniciar la grabaci6n Grabacion BasicaInsercion DE Espacios EN Blanco Inserte la cinta que vaya a grabar en la pletinaColoque la cinta en la platina Grabacion CON Edicion AlRepita el pas 5 para el resto de Ias pistas de la Cara a Grabacion CON Edicion ProgramadaPara comprobar el orden de Ios n.meres de pista programados Presione Ios botones numerados para programar una pistaAjuste DEL Temporizador Grabacion CON EL TemporizadorUsar la unidad mientras el temporizador esta puesto Para comprobar el tiempo restante hasta el apagado Ajuste DEL Temporizador DE ApagadoTomas AUX Presione el boton AJXLleve a cabo la reproduction en el equipo conectado Cuidado de Ias cintas Cuidado Y MantenimientoPara Iimpiar la caja Cuidado de Ios discosEspecificaciones Seccion del sintonizador de FM Gama de sintonizacionSeccion reproductor de discos compactos IF4DICE DE LOs Componentes Gijia Para LA Solucion DE ProblemasAvertissement Table DES Matieres #L@-ua44wdatzfz%&’fww4eConnectez le cordon secteur a une prise de ConnexionsConnexion D’UNE Antenne Exterieure TelecommandeAppuyez sur la touche I pour enregistrer I’heure Avant L’UTILISATION Reglage DE LhorlogeApres I’utilisation Appuyez sur la toucheReglage DU SON Pendant ’ENREGISTREMENT ~GLAGE Dll SONAccentuation DES Graves Agrandissement DE LA Zone AcoustiqueAccord Manuel Lorsqu’une emission FM stereo contient du bruitPour changer I’intervalle d’accord AM Pour selectionner un numero preregle sur I’unite principal PF?EREGLAGE DES StationsAccord SUR LES Numeros Preregles Repetez Ies operations 1 etLecture Aleatoire UtilisationChargement DU Disque Lecture D’UN DisqueLecture Programmed Liecture Repetee\ ~zih ‘J Insertion DES CassettesLecture D’UNE Cassette Insertion D’ESPACES Vides Appuyez sur la touche pour commencer ’enregistrementPour effacer un enregistrement Enregistrement Avec Montage AlInserez la cassette clans la platine Txofarammees Eniregistrement Avec Montage ProgrammeAppuyez sur la touche EDIT/CHECK tout en Pour verifier I’ordre des numeros des pistesPour verifier I’heure et la source specifies Appuyez a plusieurs reprises sur la touche Timer toutRkGLAGE DE LA Minuiterie Preparez la sourceRkGLAGE DE LA Minuterie DE SommeilPc,ur annuler la minuterie de sommeil Connexion D’UN Appareil Optionnel Ecoute DE sOURcEs ExternesPrises AUX Soin des cassettes Soins ET EntretienPour nettoyer Ie coffret Utilisez un chiffon doux et sec Soin des disquesAlimentation requise Partie syntoniseur AM Gamme d’accordIndex Guide DE Depistage DES DefautsPage Page For assistance and information

LCX-350 specifications

The Aiwa LCX-350 is a versatile and powerful mini stereo system designed for music enthusiasts who appreciate both style and quality sound. This compact audio unit integrates a range of features that cater to various listening preferences, making it an ideal choice for modern homes or small spaces.

One of the most notable features of the Aiwa LCX-350 is its robust sound system. Equipped with high-performance speakers, this mini stereo system delivers rich, clear audio across different genres of music. The built-in amplifier ensures that the sound is not only loud but also well-balanced, providing a gratifying listening experience whether you are playing a soft ballad or a heavy rock track.

Another significant aspect of the LCX-350 is its compatibility with multiple audio formats and sources. This unit includes CD playback capabilities, allowing users to enjoy their favorite albums with ease. Additionally, it offers USB ports for users to connect their flash drives, which is a convenient feature for those who prefer digital music libraries. The system also supports FM radio, giving users the option to listen to their favorite radio stations.

In terms of user-friendly technology, the Aiwa LCX-350 features a straightforward interface. The control panel is intuitively designed, making it accessible for individuals of all ages. The remote control adds to the convenience, allowing for easy navigation through various settings and audio sources, enhancing the overall user experience.

Furthermore, the LCX-350 is designed with aesthetics in mind. Its sleek, modern design ensures that it can fit seamlessly into any home decor while serving as an attractive centerpiece. The stylish LED display provides essential information and enhances visibility, especially in dimly lit environments.

Portability is another key characteristic of the Aiwa LCX-350. Despite its powerful output, the compact design makes it easy to move from one room to another or even take with you to parties or gatherings. This versatility means that high-quality sound can accompany users wherever they go.

In conclusion, the Aiwa LCX-350 is a well-rounded mini stereo system that combines impressive sound quality, multi-format compatibility, user-friendly controls, and an attractive design. It stands out as a reliable choice for anyone looking to enhance their music experience, making it a notable addition to any audio setup.
Top Page Image Contents