BEFORE OPERATION
To turn the unit on
Press one of the function buttons (TAPE, TUNER, AUX, CD). Playback of the inserted disc or tape begins, or the previously tuned station is received (Direct Play Function).
The POWER button is also available.
After use
Press the POWER button to turn off the power. The display changes to the clock,
Ueing the headphones
Cc,nnect the headphones to the PHONES jack with a stereo mini plug (rz3.5 mm, ‘/8 inch).
Nc, sound is output from the speakers while the headphones are plugged in.
SETTING THE CLOCK
1,3,5
| CLOCK |
2,4 | SHI[:T |
■
E-=-=2+5=-=4
When the AC cord or the car battery cord is connected for the first time, the time on the display flashes.
Set the time as follows while the power is off.
1 Press the 11 button.
The hour flashes.
2 Press the
3 Press the II button to set the hour.
The hour stops flashing and the minute starts flashing.
4 Press the
5 Press the II button to set the minute and complete setting.
The minute stops flashing on the display and the clock starts from 00 second.
To correct the current time
Press the POWER button to turn the unit off. Press the 1I button, the clock display flashes and carry out steps 1 to 5 above,
To display the current time
Press the CLOCK button while pressing the SHIFT button on the remote control. The time is displayed for 4 seconds. However, the time cannot be displayed during recorcling.
To switch to the 24-hour standard
Press the CLOCK button while pressing the SHIFT button on the remote control and then press the ■ button within 4 seccmds. Repeat the same procedure to restore the
If the clock display flashes while the power is off
This is caused by a power interruption. The current time needs to be reset.
If power is interrupted for more than approximately 12 hours, all settings stored in memory after purchase need to be reset.
5 ENGLISH