RECORDING
BASIC RECORDING
3 |
| |
2 |
| |
a |
| |
4 |
| |
s | a | |
1 | ||
s | ||
|
Preparation
•Set the tape to the point where recording will start.
•Only Type I (normal) tapes can be recorded.
1Insert the tape to be recorded on into the deck.
Insert the tape with the side to be recorded on first facing out from the unit and the exposed side down.
2Press TAPE/REV MODE to select the reverse
mode.
To record on one side only, select p.
To record on both sides, select [ or ].
3Press one of the function buttons and prepare
the source to be recorded.
To record from a CD, press CD and load the disc.
To record from a radio broadcast, press TUNER/BAND and
tune in to a station.
To record from the connected equipment, press AUX and
prepare to play.
4Press w to start recording.
|
| TAPE PLAYBACK | |
|
| ||
When the selected source is CD, play and recording start | |||
| |||
simultaneously. |
| ||
When the selected source is connected equipment, start playback | RECORDING | ||
again. | |||
on the source. |
| ||
To stop recording, press s. |
| ||
To pause recording, press a. (Applicable when the source is |
| ||
the radio or connected equipment.) To resume recording, press |
| ||
INSERTING BLANK SPACES
Insertion of
1Press w during recording or while in recording pause mode. 4 flashes for 4 seconds and the tape runs without recording. After 4 seconds, the deck enters the recording pause mode.
2Press a to resume recording.
To insert a blank space of less than 4 seconds, press w |
|
again while 4 is flashing. |
|
To insert blank spaces of more than 4 seconds, after the deck |
|
enters recording pause mode, press w again. Each time the | En |
button is pressed, a |
To erase a recording
1Insert the tape to be erased into the deck.
2Set the tape to the point where the erasure is to be started.
3Set the reverse mode by pressing TAPE/REV MODE.
4Press AUX.
If optional equipment is connected to the AUX jacks, turn it off.
5Press w to start the erasure.
ENGLISH 13