Sherwood R-863 When selecting the Function Select for Room, Room 2 source cannot be selected

When selecting the FUNCTION SELECT for ROOM 2

Press the CURSOR UP( )/DOWN( ) buttons to select the FUNCTION SELECT for ROOM 2 source,

1 then press the ENTER button

F U N C T I O N S E L E C T

VOL. CH LEVEL	R O O M 2 F E E D	:	Off
	T U N E R	V I D E O 1
ENTER	C D	V I D E O 2
	A U X	V I D E O 3
		V I D E O 4
HOME THEATER MASTER	E N T E R : S e t	, ,	, : M o v e
RNC-220

Press the CURSOR LEFT(	)/RIGHT( ) buttons to select the ROOM 2 FEED mode as desired.
2	Each time these buttons are pressed, the ROOM 2
	FEED mode is changed to “On” or “Off”.
VOL. CH LEVEL	When the ROOM 2 FEED mode is set to “Off”, the
	ROOM 2 source cannot be selected.
	When you do not use the ROOM 2 function, set the
	ROOM 2 FEED mode to Off to save electricity.
HOME THEATER MASTER
RNC-220

When the ROOM 2 FEED mode is set to On
Press the CURSOR UP( )/DOWN( )/LEFT(	)/RIGHT( ) buttons to select the desired ROOM 2
3 source, then press the ENTER button.	Each time the CURSOR CONTROL buttons are
	pressed, “+” is moved to the corresponding input
VOL. CH LEVEL	source.

When the audio input source is selected, a video input source can be marked with “+”, too.

ENTER

It means that the image of the video input source selected previously can be played separately, too.

HOME THEATER MASTER

RNC-220

ENGLISH

45