Output Connections w, Line Level Inputs = | Rotel RC-06 specification

Input Signal Connections

[See Figure 3.]

NOTE: To prevent loud noises that neither you nor your speakers will appreciate, make sure the system is turned off when you make any signal connections.

Phono/Line Input - and Ground Connection 0

The Phono/Line input is set at the factory to operate as a phono input. If you will not be using the phono input, this input can be converted to a standard line level input. See the “Converting the Phono/Line Input section of this manual. The following information covers using the - input as a phono input.

Plug the cable from the turntable into the ap- propriate left and right phono inputs. If the turntable has a “ground” wire connect it to the screw terminal 0to the left of the Phono inputs. It will help prevent hum and noise.

Line Level Inputs =

The CD, Tuner, and Aux inputs of the RC-06 are “line level” inputs. These are for connect- ing components such as CD players, Hi Fi or NICAM Stereo video cassette recorders, tuners, Laser Disc players or the analog output from a CD ROM drive.

The Left and Right channels are labeled and should be connected to the corresponding channels of the source component. The Left connectors are white, the Right connectors are red. Use high quality RCA cables for connecting input source components to the RC-06. Ask your authorized Rotel dealer for advice about cables.

Phono/Line Input Conversion

[See Figure 2 for conversion jumper locations.]

The Phono/Line input set conﬁgured at the factory for phono input operation. If you do not use the phono input and need another line level input, this input can be converted to a standard line level input.

In order to convert the input for line level usage, four “jumper” connectors inside the RC-06 must be moved from one set of pins to another. This task should be done by a qualiﬁed technician. See your authorized Rotel dealer.

Resetting Jumpers

Before opening the RC-06 cabinet to re- set the jumpers, the power cord must be unplugged from the wall. DO NOT OPEN THE CABINET OF THE RC-06 BEFORE THE POWER CORD HAS BEEN UNPLUGGED FROM THE WALL. FAILURE TO DO SO WILL EXPOSE YOU TO HAZARDOUS VOLT- AGES.

After the power cord has been unplugged, remove the screws that hold the cabinet cover in place and slide the cover off. Locate the four jumper pin blocks near the Phono/Line input labeled SW1, SW2, SW3 and SW4. The factory standard (phono) position of the jumpers is on pins 2 and 3 of each block. To convert the RC-06 Phono/Line input to a line type input move all four jumpers so they are on pins 1 and 2 of each jumper pin block. Replace the cover of the cabinet. Do not plug the RC-06 power cord back into the wall outlet until the cabinet cover has been replaced.

English

Recorder Connections q

[See Figure 3.]

The Tape inputs and outputs can be connected to any record/playback device that accepts standard line level analog input and output signals. Typically that will be a conventional tape recorder.

When connecting a recorder to the RC-06 remember that the outputs of the recorder must be connected to the tape inputs of the RC-06. Similarly the tape outputs of the RC-06 must be connected to the inputs of the recorder. As with other sources be sure to connect the Left and Right channels of each device to the proper channels on the associated components. Use high quality connecting cables to prevent loss of sound quality.

NOTE: The Tape Outputs are not affected by the Volume or Balance controls. They receive a fixed level signal.

Output Connections w

[See Figure 3.]

The RC-06 has RCA-type output connectors that are compatible with the inputs of most power ampliﬁers. Use high quality cables and be sure to connect the Left and Right channel outputs of the RC-06 to the correct channels of the ampliﬁer.

There are two sets of outputs on the RC-06. The second set of outputs may be used in custom system conﬁgurations to drive a second power ampliﬁer or to supply a signal to a special signal processor.

NOTE: Changes to the settings of the Volume and Balance controls affect the signal from the Preamp Outputs.

RC-06 specifications

The Rotel RC-06 is a distinguished preamplifier that elevates the listening experience through its advanced features and robust design. Known for its dynamic performance and precision, the RC-06 serves as the ideal hub in high-fidelity audio systems, ensuring seamless integration with various audio components.

One of the standout features of the RC-06 is its high-quality, low-noise circuitry, which enhances audio clarity and minimizes distortion. At the heart of its design, Rotel incorporates the renowned Balanced Mode Radiator technology, allowing for superior audio reproduction. This advanced circuitry ensures that every nuance of your favorite music is faithfully captured, from the softest whisper to the most powerful crescendos.

Users will appreciate the RC-06's versatility, featuring multiple input options, including RCA and balanced XLR connections. This allows for easy connection to a variety of audio sources, such as CD players, turntables, and digital streaming devices. Additionally, the preamp provides customizable output levels, enabling precise control over your audio system.

Equipped with a high-quality volume control, the RC-06 minimizes signal loss while providing smooth and accurate adjustments. The motorized volume control is not only convenient but also enhances the aesthetic of the unit, delivering a premium feel to the listening experience. Moreover, a remote control is included, granting users the flexibility to adjust settings from a distance.

The construction of the RC-06 reflects Rotel's commitment to quality and durability. The chassis is designed to shield against electromagnetic interference, which is crucial for maintaining audio integrity. The components used in the RC-06 have been meticulously selected to ensure long-lasting performance, further underlining Rotel’s reputation for excellence in audio engineering.

In summary, the Rotel RC-06 preamplifier combines innovative technologies with high-quality construction, catering to audiophiles who demand exceptional sound and functionality from their audio components. Its rich feature set, including versatile connectivity options and advanced circuitry, positions the RC-06 as a cornerstone in any serious listening environment, ensuring that music is experienced at its absolute best. Whether used in a simple stereo setup or as part of a complex surround sound system, the RC-06 thrives, providing a listening experience that is both immersive and rewarding.