Rotel RC-06 owner manual Phones Output, Media Player, Audio Controls, IR Inputs and Outputs

Page 8

RC-06Stereo Control Amplifier

8

Phones Output 3

The Phones output allows you to connect headphones for private listening. This output accommodates standard stereo phone 3.5 mm (1/8”) plugs. Plugging in a set of headphones does not cut off the signal to the outputs. The settings of the Function Selector and the Tape Monitor Control determines which source is heard. To listen to or monitor the component connected to the Tape input set the Monitor Control to the Tape position. For all other inputs leave the Monitor Control in the Source position and select the source you want to listen to with the front panel Function Selector or press the corresponding source button on the remote control.

NOTE: Because the sensitivity of head- phones and the other components in the system can vary widely, always reduce the volume level before connecting or discon- necting headphones.

Media Player 4

A 3.5mm (1/8”) stereo input socket for a “Media Player” is provided on the front of the amplifier and is selected by setting the function control to (AUX2). Any portable stereo cassette, compact disc player or hard disc playback device can be connected via this input. If the device you are connecting has its output via the headphone socket then note that you must adjust the volume control on the player for sound to be heard. Should the sound be loud and distorted turn down the volume on the player and if it is only just audible through the speakers even when the amplifier volume control is turned up fairly high then adjust the volume control on the player.

NOTE: When the 3.5mm (mimi jack) is inserted into the Media Player socket the rear input called AUX2 is disconnected. Removing the 3.5mm plug from the Media player socket will allow the rear AUX2 input to function.

Audio Controls

Volume Control 6 p

Turn the controls clockwise to increase the volume, or counterclockwise to decrease the volume. Or use the remote control volume but- tons. Press the + button to increase the volume, or the – button to decrease the volume.

Balance Control 7

The Balance Control adjusts the left-to-right balance of the sound output. Normally the control should be left in the center position. In some situations, typically when the main listening position is not ideally centered be- tween the speakers, it may be necessary to adjust the control to achieve proper left-to-right balance. Turning the control counter-clockwise shifts the sound balance to the left. Turning the control clockwise shifts the sound balance to the right.

Function Control 9 i

The Function control selects the input signal source. Turn the Function control to the source you want to listen to. Or press the corresponding source button on the remote control.

The signal selected by the Function control is the one you hear, as long as the Monitor control is set to the Source postion. (See the following section.) The signal selected by the Function control also goes to the Tape Outputs.

Monitor Control 8

When the Monitor Control is set to the Source position, the signal you hear, and which goes to the Outputs, is selected by the Function Control. To listen to the signal from a recorder connected to the Tape Inputs, set the Monitor Control to the Tape position. When the Monitor Control is in the Tape position, the signal from the Tape Input also goes to the Outputs.

The signal that goes to the Tape Output is always selected by the Function Control. When you are recording with a unit that has monitoring capabilities, you can listen to the sound just recorded by setting the Monitor Control to the Tape position.

Mute Control u

Remote Only

To temporarily mute the sound of the system press the Mute Button on the RR-AT94 remote. The volume Control LED blinks when the sound is muted. Press the button again to return the sound volume to the original level.

IR Inputs and Outputs

External Remote Input e

This 3.5 mm mini-jack (labeled EXT REM IN) receives command codes from an industry- standard infrared receivers (Xantech, etc.) located in the main listening room. This feature is useful when the unit is installed in a cabinet and the front-panel sensor is blocked. Consult your authorized Rotel dealer for information on external receivers and the proper wiring of a jack to fit the mini-jack receptacle.

NOTE: The IR signals from the EXTERNAL REMOTE IN jack can be relayed to source components using external IR emitters or hardwired connections from the IR OUT jacks.

IR Output r

The IR OUT jack sends IR signals received at the EXTERNAL REM IN jack to an infrared emitter, or to Rotel CD players, cassette decks, or tuners with a compatible rear panel IR connector. This allows you to use IR control features to oper- ate other components when the IR sensors on those components are blocked or obstructed by installation in a cabinet.

See your authorized Rotel dealer for informa- tion on IR repeater systems.

NOTE: The EXT REM IN jack located next to the IR OUTPUT jack is for use with an external IR sensor which duplicates the front panel IR sensor.

Page 7 Page 9
Image 8
Page 7 Page 9
Contents RC-06 Important Safety Instructions English RC-06 Stereo Control Amplifier Getting Started ContentsAbout Rotel Few Precautions PlacementAC Power Input y Power/Standby Switch 1o and Power IndicatorResetting Jumpers Output Connections wPhono/Line Input and Ground Connection Line Level Inputs =Phones Output Media PlayerAudio Controls IR Inputs and OutputsTroubleshooting Volt Trigger Outlet tSpecifications 9EnglishInstructions importantes concernant la sécurité Français Sommaire Au sujet de RotelPour démarrer Alimentation secteur et mise sous tension Prises de sortie w Branchement des signaux en entréeEntrées et sorties IR infrarouge Commandes audioPrise casque Prise de commutation Trigger 12 V t SpécificationsProblèmes de fonctionnement 15FrançaisWichtige Sicherheitshinweise Die Firma Rotel DeutschNetzspannung und Bedienung Eingangssignalanschlüsse TAPE-Anschlüsse qMedia Player-Anschluss KopfhörerbuchseBedienelemente Bei Störungen Technische Daten12V Trigger OUT- Anschlüsse t 21DeutschImportanti informazioni di Sicurezza Indice Per IniziareAlcune Parole sulla Rotel ItalianoInterruttore di accensione 1o ed indicatore di accensione Sensore telecomandoAlcune Precauzioni PosizionamentoCollegamenti di segnale in ingresso Collegamenti del registratore qUscita Cuffie Controlli AudioIngressi ed uscite IR raggi infrarossi RC-06Preamplificatore StereoIl LED indicatore Power non sia accende Specifiche TecnicheSostituzione del fusible Nessun suonoInformación Importantes Relacionadas con la Seguridad Contenido Acerca de Rotel Para EmpezarEl Mando a Distancia RR-AT94 EspañolSensor de Control Remoto Algunas PrecaucionesColocación Entrada de Corriente Alterna yConexión de Componentes de Grabación q Conexiones de EntradaRC-06Preamplificador Estereofónico Controles de AudioEntradas y Salidas de Rayos Infrarrojos Toma para Señal de Disparo de 12 Voltios t Problemas y Posibles SolucionesCaracterísticas Técnicas Waarschuwing Inhoud Wij van Rotel NederlandsHet aansluiten op het lichtnet De uitgangen w De verbindingen maken met een opname/ weergaveapparaat qDe bedieningsorganen De hoofdtelefoonuitgangWat te doen bij problemen? De lichtnet-indicator werkt nietTechnische gegevens Het vervangen van de zekeringViktig säkerhetsinformation Innehåll Om Rotel IntroduktionRR-AT94 Fjärrkontroll SvenskaStröm och strömfunktioner Hörlursuttag Media Player-ingångLinjeingångar = Växla mellan skivspelar- och linjeingångOch utgångar för IR-signaler Volts styrsignaler tLjudkontroller FelsökningSpecifikationer Важные инструкции по безопасности Пульт RR-AT94 СодержаниеПервые шаги См. рис Квалифицированному мастеру или в сервисную службу RotelВыход на наушники Подсоединения для записи qМедиа плеер Media Player Отсоединением наушников уменьшайте громкостьРегуляторы звука 12-В триггерные выходы tДиагностика и устранение неполадок Только с пультаОбщие гармонические искажения Технические характеристикиРусский USA

RC-06 specifications

The Rotel RC-06 is a distinguished preamplifier that elevates the listening experience through its advanced features and robust design. Known for its dynamic performance and precision, the RC-06 serves as the ideal hub in high-fidelity audio systems, ensuring seamless integration with various audio components.

One of the standout features of the RC-06 is its high-quality, low-noise circuitry, which enhances audio clarity and minimizes distortion. At the heart of its design, Rotel incorporates the renowned Balanced Mode Radiator technology, allowing for superior audio reproduction. This advanced circuitry ensures that every nuance of your favorite music is faithfully captured, from the softest whisper to the most powerful crescendos.

Users will appreciate the RC-06's versatility, featuring multiple input options, including RCA and balanced XLR connections. This allows for easy connection to a variety of audio sources, such as CD players, turntables, and digital streaming devices. Additionally, the preamp provides customizable output levels, enabling precise control over your audio system.

Equipped with a high-quality volume control, the RC-06 minimizes signal loss while providing smooth and accurate adjustments. The motorized volume control is not only convenient but also enhances the aesthetic of the unit, delivering a premium feel to the listening experience. Moreover, a remote control is included, granting users the flexibility to adjust settings from a distance.

The construction of the RC-06 reflects Rotel's commitment to quality and durability. The chassis is designed to shield against electromagnetic interference, which is crucial for maintaining audio integrity. The components used in the RC-06 have been meticulously selected to ensure long-lasting performance, further underlining Rotel’s reputation for excellence in audio engineering.

In summary, the Rotel RC-06 preamplifier combines innovative technologies with high-quality construction, catering to audiophiles who demand exceptional sound and functionality from their audio components. Its rich feature set, including versatile connectivity options and advanced circuitry, positions the RC-06 as a cornerstone in any serious listening environment, ensuring that music is experienced at its absolute best. Whether used in a simple stereo setup or as part of a complex surround sound system, the RC-06 thrives, providing a listening experience that is both immersive and rewarding.
Top Page Image Contents