Kenmore 665.1404 manual Options Turbozonetm option On some models, Added time to cycle Typical Max

IEco

I

Cycle

that

provides

the

maximum

water

and energy saving

All soil

levels

110

150

4.0

_

ossible

to

give

you

optimum

cleaning

by

extending

the

cycle

(15.0)

tlme

_Adding

options

will

add

time

to

the

cycle.

See options

information

section.

_This

is

the

approximate

cycle

time obtained

with

120°F

(49°C)

hot water

available

at the dishwasher.

Increase

in time results

from low temperature of the incoming water,

Options

TURBOZONETM option

(on some models)

Blasts into every corner to eliminate

the need for soaking and scrubbing of

dirty, baked-on dishes. For your

toughest items, use the TURBOZONE TM option with the Pots Pans cycle. See loading information.

Can be selected

with

SmartWash ®xE

Pots & Pans

Normal Wash

What it does

Directs allof the

cleaning power of the

dishwasher to the

TURBOZONE TM area

during certain times in

the wash cycle.

Added time to cycle

Typical Max

3O5O

Added

Water t

Gallons

(Liters)

0 - 3.0

11.2)

High Temp

Raises the main wash temperature to improve cleaning. When used with the Normal Wash cycle this will provide a little extra tough cleaning capability, but not as much as the Pots Pans cycle.

Sani Rinse

This high temperature option sanitizes your dishes and glassware in accordance with National Sanitation

Foundation (NSF)/ANSI Standard 184 for Residential Dishwashers. Certified residential dishwashers are not intended for licensed food establishments. The Sani indicator indicates at the end of the cycle whether the Sani Rinse option was successfully completed. If the indicator does not activate, it is probably due to the cycle being interrupted.

Smart Dry

Turns the heat element on with fan

assist on at the end of the wash cycle. Use rinse aid with or without the

Smart Dry option for best drying results. Plastic items are less likely to deform when loaded in the top dish rack.

SmartWash ®xE

Pots & Pans

Normal Wash

SmartWash ®xE

Pots & Pans

Normal Wash

Available with

any cycle except Quick Rinse

Raises the main wash temperature from 105°F (41°C) to 120°F (49°C).

Increases the main wash temperature from 105°F (41°C) to 120°F (49°C) and the final rinse from 140°F (60°C) to 155°F (68°C).

Turns the heat element on with fan assist on at the end of the wash cycle.

224O

5373

4451

0 - 3.0

11.2)

0 - 3.0

11.2)

0

tThe maximum additional water used for any combination of options is 2.1 gal. (7.9 L).

17