Multiquip DCA85usJ2 manual First Time Start Up, Main Menu Navigation, Selecting a Language

DIAGNOSTIC DISPLAY

First Time Start Up

1.When power is fi rst applied to the diagnostic display, the “Logo” is displayed.

2.The first seven items of the “Main Menu” will be displayed. Touching the “Arrow Buttons” will scroll through the menu selection.

GO TO 1-UP DISPLAY

LANGUAGES

STORED CODES

ENGINE CONFG

SETUP 1-UP DISPLAY

SETUP-4-UP DISPLAY

SELECT UNITS

2.The “Wait to Start” message will be displayed for engines with a pre-startup sequence. Once the “Wait to Start” message is no longer displayed the operator may start the engine. Note: Displays only when SAE J1939 message is supported by engine manufacture.

WAIT TO

START

PREHEAT

3.Once the engine has started the single engine parameter is displayed.

0 1500 3000

1800 RPM

ENG RPM COOL TEMP

3.Touching the right arrow button will scroll down to reveal the last items of “Main Menu” screen highlighting the next item down.

ADJUST BACKLIGHT

ADJUST CONTRAST

UTILITIES

4.Touch the Arrows” to scroll to the desired menu item or touch “Menu” to exit the Main menu and return to the engine parameter display.

				98%	1000 RPM
0	1500		3000	LOAD RPM	ENG RPM
	1800 RPM
				14.2	57 PSI
ENG RPM		COOL TEMP		BATT VOLT	OIL PRES

Main Menu Navigation

1.Starting at the single or four engine parameter display, touch “Menu”.

				98%	1000 RPM
0			3000	LOAD RPM	ENG RPM
	1500
	1800 RPM
				14.2	57 PSI
ENG RPM		COOL TEMP		BATT VOLT	OIL PRES

Selecting a Language

1.Starting at the main menu display use the “Arrows to scroll to the “Language” menu and once highlighted touch the “Enter” button.

GO TO 1-UP DISPLAY

LANGUAGES

STORED CODES

ENGINE CONFG

SETUP 1-UP DISPLAY

SETUP-4-UP DISPLAY

SELECT UNITS

DCA85USJ2 60 HZ GENERATOR • OPERATION AND PARTS MANUAL — REV. #1 (03/22/11) — PAGE 19