Multiquip DCA85usJ2 manual Select Units, Setup 1-UP Display

DIAGNOSTIC DISPLAY

Select Units

1.Starting at the single or four engine parameter display touch the “Menu Button”.

			98%	1000 RPM
0		3000	LOAD RPM	ENG RPM
	1500

1800 RPM

		14.2	57 PSI
ENG RPM	COOL TEMP	BATT VOLT	OIL PRES

2.The main menu will pop up on the display. Use the arrow buttons to scroll through the menu until the “Select Units” is highlighted.

GO TO 1-UP DISPLAY

STORED CODES

ENGINE CONFG

SETUP 1-UP DISPLAY

SETUP-4-UP DISPLAY

SELECT UNITS

ADJUST BACKLIGHT

3.Once the “Select Units” menu item has been highlighted touch the “Enter Button” to access the “Select Units” function.

GO TO 1-UP DISPLAY

STORED CODES

ENGINE CONFG

SETUP 1-UP DISPLAY

SETUP-4-UP DISPLAY

SELECT UNITS

ADJUST BACKLIGHT

4.Use the arrows to highlight the desired units. “English” for imperial units i.e. PSI,”F or Metric kPa, Metric Bar for IS units i.e. kPa, Bar, “C".

ENGLISH

ESPANOL

FRANCAIS

DEUTSCH

5. Touch the “Enter Button” to select the highlighted units.

ENGLISH

METRIC KPA

METRIC BAR

6. Touch the “Menu Button” to return to the “Main Menu”

.

ENGLISH	*
METRIC KPA
METRIC BAR

7.Touch the “Menu Button” to exit the Main menu and return to the engine parameter display.

			1000 RPM
GO TO 1-UP DISPLAY	98%
STORED CODES		LOAD RPM	ENG RPM
ENGINE CONFG
SETUP 1-UP DISPLAY
SETUP-4-UP DISPLAY
	14.2		57 PSI
SELECT UNITS
		BATT VOLT	OIL PRES
ADJUST BACKLIGHT

SETUP 1-UP DISPLAY

1.Starting at the single engine parameter display, touch the “Menu Button”.

			98%	1000 RPM
0		3000	LOAD RPM	ENG RPM
	1500

1800 RPM

		14.2	57 PSI
ENG RPM	COOL TEMP	BATT VOLT	OIL PRES

2.The main menu will pop up on the display. Use the “Arrow Buttons” to scroll through the menu until the “Setup 1-up Display” is highlighted.

GO TO 1-UP DISPLAY

STORED CODES

ENGINE CONFG

SETUP 1-UP DISPLAY

SETUP-4-UP DISPLAY

SELECT UNITS

ADJUST BACKLIGHT

DCA85USJ2 60 HZ GENERATOR • OPERATION AND PARTS MANUAL — REV. #1 (03/22/11) — PAGE 27