Multiquip DCA85usJ2 manual Contrast Adjustment

DIAGNOSTIC DISPLAY

3.Once the “Adjust Backlight” menu item has been highlighted touch the “Enter Button” to activate the “Adjust Backlight” function

GO TO 1-UP DISPLAY

STORED CODES

ENGINE CONFG

SETUP 1-UP DISPLAY

SETUP-4-UP DISPLAY

SELECT UNITS

ADJUST BACKLIGHT

4.Use the “Arrow Buttons” to select the desired backlight intensity..

ADJUST BACKLIGHT

CONTRAST ADJUSTMENT

1.Starting at the single or four engine parameter display, touch the “Menu Button”.

			98%	1000 RPM
0		3000	LOAD RPM	ENG RPM
	1500

1800 RPM

		14.2	57 PSI
ENG RPM	COOL TEMP	BATT VOLT	OIL PRES

2.The main menu will pop up on the display. Use the “Arrow Buttons” to scroll through the menu until “Adjust Contrast” is highlighted.

GO TO 1-UP DISPLAY

STORED CODES

ENGINE CONFG

SETUP 1-UP DISPLAY

SETUP-4-UP DISPLAY

SELECT UNITS

ADJUST BACKLIGHT

5. Touch the “Menu Button” to return to the main menu.

ADJUST BACKLIGHT

6.Touch the “Menu Button” to exit the Main menu and return to the engine parameter display

			1000 RPM
GO TO 1-UP DISPLAY	98%
STORED CODES		LOAD RPM	ENG RPM
ENGINE CONFG
SETUP 1-UP DISPLAY
SETUP-4-UP DISPLAY	14.2		57 PSI
SELECT UNITS
		BATT VOLT	OIL PRES
ADJUST BACKLIGHT

3.Once the “Adjust Contrast” menu item has been highlighted touch the “Enter Button” to activate the “Adjust Contrast” function.

STORED CODES

ENGINE CONFG

SETUP 1-UP DISPLAY

SETUP-4-UP DISPLAY

SELECT UNITS

ADJUST BACKLIGHT

ADJUST CONTRAST

4.Use the “Arrow Buttons” to select the desired contrast intensity

ADJUST CONTRAST

5.Touching the “Menu Button” will take you back through the menus.

PAGE 26 — DCA85USJ2 60 HZ GENERATOR • OPERATION AND PARTS MANUAL — REV. #1 (03/22/11)