Husqvarna 5118761-06 manual Consult Your Local Approved Service Centre

Page 11

Maintenance

Storing your Lawnmower

1.Do not store your lawnmower immediately after use.

2.Wait until the engine has cooled to avoid a potential fire hazard.

3.Clean your lawnmower

4.Store in a cool, dry place where your

lawnmower is protected from damage.

Service Recommendations

Your product is uniquely identified by a silver and black product rating label.

We strongly recommend that your product is serviced at least every twelve months, more often in a professional application.

Engine Maintenance Schedule

Follow the hourly or calendar intervals, whichever occur first. More frequent service is required when

operating in adverse conditions First 5 hours - Change oil.

Every 5 hours or daily - Check oil level.

Clean finger guard. Clean around muffler. Every 25 hours or every season - Change oil if

operating under heavy load or high ambient

temperature. Service air cleaner.

Every 50 hours or every season - Change oil.

Inspect spark arrester, if equipped.

Every 100 hours or every season - Clean cooling system*. Replace spark plug.

*Clean more often under dusty conditions, or when airborne debris is present or after

prolonged operation cutting tall, dry grass.

Engine Servicing & Guarantee

The engine fitted to your lawnmower is guaranteed by the Engine Manufacturer.

Fault Finding

Engine Will Not Start

1.Ensure Operator Presence Control is in the start position.

2.Check that there is sufficient fuel in the tank and the cap air vent is clear.

3.Remove and dry the spark plug.

4.Petrol may be stale. Replace. Once petrol has been replaced, it may take a little time for fresh petrol to filter through.

5.Check that the blade bolt is tight. A loose bolt could cause difficult starting.

6.If the engine will still not start, immediately disconnect the spark plug lead.

7.CONSULT YOUR LOCAL APPROVED SERVICE CENTRE.

Lack of Engine Power and/or Overheating

1.Disconnect the spark plug lead and allow the engine to cool down.

2.Clean grass clippings and debris from around the engine and air inlets and the underside of the deck.

3.Clean the engine air filter (Ask your local Approved Service Centre to clean the engine air filter thoroughly).

4.Petrol may be stale replace. Once petrol has been replaced, it may take a little time for fresh petrol to filter through.

5.If the engine still lacks power and/or is overheating, immediately disconnect the spark plug lead.

6.CONSULT YOUR LOCAL APPROVED SERVICE CENTRE.

Excessive Vibration

1.Disconnect the spark plug lead.

2.Check that the blade is correctly fitted.

3.If the blade is damaged or worn replace it with a new one.

4.If vibration persists, turn the blade through 1800 by first loosening the blade bolt, turning the blade and re-tightening the blade bolt.

5.If vibration persists, immediately disconnect the spark plug lead.

6.CONSULT YOUR LOCAL APPROVED SERVICE CENTRE.

ENVIRONMENTAL INFORMATION

Husqvarna Outdoor Products are manufactured under an Environmental Management System (ISO 14001) using, where practical, components manufactured in the most environmentally responsible manner, according to company procedures, and with the potential for recycling at the end of the products’ life.

•Packaging is recyclable and plastic components have been labelled (where practical) for categorised recycling.

•Awareness of the environment must be considered when disposing of ‘end-of-life’ product.

•If necessary, contact your local authority for

disposal information.

DISPOSAL OF FUELS AND LUBRICATING OILS

•Wear protective clothing when handling any fuels and lubricants.

•Avoid contact with skin.

•Remove petrol and engine oil before transporting the product.

•Contact your local authority for information of your nearest Recycling/Disposal Station.

Do NOT dispose of used fuels/oils with household waste

Waste fuels/oils are harmful, but can be recycled and should be disposed of through the recognised facilities.

Do NOT dispose of used fuels/oils to water.

Do NOT incinerate

ENGLISH - 4

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Handleiding voor de gebruiker Operator’s ManualBetriebsanleitung Manuel de l’UtilisateurMaster Viktig Page Page NL Inhoud GB ContentsDE Inhalt FR Table DES MatièresPage Preparation Explanation of Symbols on your Husqvarna MasterFuel Safety GeneralNever USE Leaded Petrol Adjusting the Cutting Height2 Handlebar Stops Must be Fitted Before USE Annually Carry OUT the Following USE GlovesDisposal of Fuels and Lubricating Oils Consult Your Local Approved Service CentreVerwendung Erklärung der am Husqvarna Master 46 befindlichen SymboleAllgemeines VorbereitungEinstellung DER Scnitthöhe MontageanweisungenAngaben ZUM Motor Handschuhe Verwenden Starten UND StoppenVerwendung WartungKRAFTSTOFF- UND Schmierölentsorgung Lagerung Ihres RasenmähersZu wenig Motorleistung und/oder Überhitzung Übermäßiges VibrierenPréparation Precautions a PrendreExplication des symboles de la tondeuse Husqvarna Master GénéralitésMonter LES Deux Arrets DE Guidon Avant Toute Utilisation Instructions DE MontagePorter DES Gants Démarrage ET ArrêtFonctionnement EntretienMise AU Rebut DES Combustibles ET Lubrifiants Contacter LA Station Service AgreeeVibrations excessives Voorbereiding Verklaring van symbolen op uw Husqvarna MasterVeiligheidsvoorschriften AlgemeenHET Instellen VAN DE Maaihoogte MONTAGE-INSTRUCTIESMOTOR-INFORMATIE Draag Handschoenen AAN- EN AfzettenGebruik OnderhoudOvermatige trilling Raadpleeg UW Plaatselijke Erkende SERVICE-CENTRUMOnderhoud Onvoldoende kracht in de motor en/of oververhittingForberedelse Forklaring av symbolene på din Husqvarna MasterSikkerhetsregler GenereltInnstilling MonteringsanvisningMerknader OM Motoren DE 2 Håndtaksstopperne MÅ Monteres FØR BrukBruk Hansker Start OG StoppBruk VedlikeholdKraftig vibrasjon Rådfør DEG MED Ditt Lokale Godkjente ServicesenterVedlikehold Mangel på kraft i motoren og/eller overhetingKäyttö VarotoimenpiteetYleistä EsivalmistelutKummatkin Pysäyttimet Täytyy Asentaa Kahvaan Ennen Käyttöä KOKOONPANO-OHJEETMoottoria Koskevia Tietoja Käytä Hansikkaita Käynnistys JA SammutusKäyttö KunnossapitoPolttoaineiden JA Voiteluöljyjen Hävittäminen KunnossapitoOTA Yhteys Paikalliseen OTA Yhteys PAIKALLISEEN, Valtuutettuun HuoltopisteeseenFörberedelse Förklaring av symboler på din Husqvarna MasterSäkerhetsföreskrifter AllmäntAnvänd Endast Blyfri Bensin MonteringsinstruktionerMotor InställingAnvänd Handskar Start OCH StoppKörning UnderhållFör stora vibrationer Kontakta DIN Lokala Auktoriserade ServiceverkstadUnderhåll Ingen motorstyrka och/eller överhettningSikkerhedsregler Indstilling MonteringsvejledningMotorinformation DE 2 Håndtagsstopplader Skal Monteres Inden BrugBrug Handsker Start OG StandsningBrug VedligeholdelseOverdreven vibration Konsulter Deres Lokale Godkendte ServicecenterVedligeholdelse Manglende motorkraft og/eller overophedningPreparación Precauciones DE SeguridadExplicación de los símbolos en su Husqvarna Master GeneralidadesAjuste Instrucciones DE MontajeNotas Acerca DEL Motor Utilice Guantes Arranque Y ParadaUSO MantenimientoVibración excesiva MantenimientoAcuda a Nuestro Distribuidor Oficial Autorizado MÁS Próximo Falta de potencia en el motor y/o sobrecalentamientoUtilização Precauções DE SegurançaExplicação dos símbolos da sua Husqvarna Master PreparaçãoNunca USE Gasolina COM Chumbo Instruções DE MontagemNotas Sobre O Motor Manutenção Arranque E ParagemUtilização Vibração Excessiva ManutençãoConsulte O SEU Centro DE Assistência Local Aprovado Falta de Potência do Motor e/ou SobreaquecimentoPreparazione Precauzioni PER LA SicurezzaSpiegazione dei simboli sul vostro Husqvarna Master GeneraleNON Usare MAI Benzina COL Piombo Istruzioni DI MontaggioRegolazione Indossare Guanti Avviamento E ArrestoImpiego ManutenzioneVibrazioni eccessive ManutenzioneRivolgersi AL Centro DI Assistenza Autorizzato DI Zona Il motore non rende e/o si surriscaldaΓενικ EπεHusqvarna Master Πριν ναΓεµ ΣυντΤρα ∆ιακTιµΣε 3 δευτερ Με λΑπελευθερ Θα σταµατ∆IAΘEΣH Kayσiμωn KAI Λiπantikωn ΛA∆IΩN Συμβυλευθειτε Τ Τ Εγγεκριμεν ΚεντρEC Conformiteitsverklaring EC Declaration of ConformityEC Konformitätserklärung EC Déclaration DE ConformitéEC Overensstemmelseserklæring EC KonformitetserklæringEC Vaatimustenmustenmukaisuusvakuutus EC Försäkran OM ÖverensstämmelseEC ∆HΛΩΣH Σymmopφωσhσ EC Declaración DE ConformidadEC Declaração DE Conformidade EC Dichiarazione DI Conformità19 m/s2 19 kg MasterBriggs & Stratton Sprint 46 cm 000 RPM DB a 80.1 dBAPage Page Page Page Danmark BELGIQUE/BELGIËBergensesteenweg 719, 1502 Lembeek Česká Republika

5118761-06 specifications

The Husqvarna 5118761-06 is a high-performance part designed specifically for enhancing the efficiency and effectiveness of various Husqvarna outdoor power tools. This product is particularly known for its reliability and durability, essential qualities for any tool used in demanding environments.

One of the key features of the Husqvarna 5118761-06 is its robust construction. Made from high-quality materials, it can withstand the rigors of heavy-duty use, making it an ideal choice for both professional landscapers and homeowners alike. The design focuses on providing longevity and resilience, ensuring that users can depend on it for extended periods without frequent replacements.

In terms of technology, the Husqvarna 5118761-06 employs advanced engineering techniques that enhance its overall performance. This part is designed to provide optimum compatibility with a wide range of Husqvarna tools, ensuring seamless integration and functionality. Its precision manufacturing means that it fits perfectly within the tool's existing systems, minimizing the risk of malfunctions and optimizing power transfer.

Another notable characteristic of the Husqvarna 5118761-06 is its user-friendly installation. This part comes with straightforward guidance that enables users to replace it quickly and efficiently without needing specialized tools or extensive mechanical knowledge. This aspect is particularly beneficial for those who prefer to handle maintenance tasks on their own.

Additionally, the Husqvarna 5118761-06 is designed with an emphasis on safety. It incorporates features that help reduce the risk of accidents when operating Husqvarna outdoor power tools. Users can operate their devices with confidence, knowing that safety has been prioritized in the design.

Moreover, this product is also environmentally conscious, aligning with Husqvarna's commitment to sustainable practices. The materials used are selected to minimize environmental impact while still ensuring high performance.

In summary, the Husqvarna 5118761-06 stands out due to its durable construction, advanced compatibility features, ease of installation, safety considerations, and environmental responsibility. It represents an excellent choice for anyone looking to enhance the performance and longevity of their Husqvarna outdoor tools, making gardening and landscaping tasks more efficient and enjoyable. Whether you are a professional or a weekend warrior, this part is sure to elevate your outdoor power tool experience.
Top Page Image Contents