Utilities 7-85
Option Descriptions
The number of active blobspaces and dbspaces and the total number of
existing blobspaces and dbspaces are listed. The maximum number of
blobspaces and dbspaces is specified as DBSPACES in the OnLine configu-
ration file.
The second section of thetbstat -d output describes the chunks:
Position 1:
Position 2:
Position 3:
M – Mirror
N – Not Mirrored
X – Newly mirrored
B – Blobspace
owner is the owner of the dbspace.
name is the name of the dbspace.
address is the address of the chunk.
chk/dbs is the chunk number and the associated dbspace number.
offset is the offset into the device in pages.
size is the size of the chunk in pages.
free is the number of freepages in the chunk. (A tilde indicates an
approximate value for blobspaces.)
bpages isthe number of free blobpages. Blobpages can be larger than
disk pages; therefore, thebpages value can be less than the
free value.
flags gives the chunk status information as follows:
Position 1:
Position 2:
Position 3:
P – Primary
M – Mirror
O – On-line
D – Down
R – Recovery
X – New mirror
B – Blobspace
- – Dbspace
pathname is the pathname of the physical device.