- INSTALLATION MANUAL -
Press enter to gain access to the mode for cancelling the data stored in the memory The display shows 
Press Enter to erase the saved data
Press menu/esc to exit
RESTORING DEFAULT PARAMETERS
This function restores the original parameters.
ATTENTION: should you use the device with the “RESTORE” option, available on the card, please contact the manufacturer for proper setting of the electronic controller configuration parameters.
Press menu/esc to select the desired menu
Use the keys up and down to display
Service
Esc
Press enter to confirm your choice.
| Service | 0 |
The display shows | Password |
(only the 1st time)
Use the keys up and down to select the password
Press enter to confirm your choice.
The display shows | Parameters |
|
| |
Esc |
|
| ||
|
|
| ||
|
|
|
|
|
|
|
|
|
|
Use the keys up and down to display |
| Restore |
| |
| Esc |
| ||
|
|
|
| |
Press enter to gain access to the mode for restoring the data stored in the memory
The display shows | Ok | Restore? |
No |
Press Enter to restore the memory
Press menu/esc to exit
36
