2.4 | Basic scan operation | 2 |
|
|
|
%To directly type in the destination address, press [Direct Input], select the transmission method, and then type in the destination address.
1
2
%A document can be sent to multiple destinations at the same time (Broadcast transmission). For details on sending a document to multiple destinations, refer to page
%If necessary, press [Scan Settings], [Original Settings] or [Communication. Settings], and specify the desired settings. For details, refer to chapter 5 of the [User’s Guide Network Scan/Fax/Network Fax Operations].
%Press the [Proof Copy] key before pressing the [Start] key to display the preview image of the currently specified settings on the touch panel.
3 Position the document to be scanned.
4 Press the [Start] key.
Basic operations Chapter 2
%To scan multiple originals using the original glass, select [Separate Scan]. After scanning 1st page of the original, load the 2nd page and press [Start] again. Repeat this process until all the pages have been scanned.
After the last page has been scanned, press [Finish], and then press the [Start] key.
dReference
The network settings must be specified before scan data can be sent. Network settings should be specified by the administrator. Network settings can also be specified by using Web Connection. For easier operation, specify in advance any settings other than the network settings according to the desired application.
For details, refer to chapter 4 of the [User’s Guide Network Administrator].
