Introduction Chapter 1

1

Loading paper

1.20

Loading paper into the bypass tray

Paper can be fed manually through the bypass tray when you wish to print onto paper of a size that is not loaded into a paper tray, or when you wish to print onto envelopes, OHP transparencies or other special paper.

Follow the procedure described below to load paper into the bypass tray.

1 Open the bypass tray.

%When loading large-sized paper, pull out the tray extension.

%Use mount kit MK-713 for loading banner paper.

2 Load the paper into the tray.

%Load paper so that the side to be printed on faces downward.

%Do not load so many pages that the top of the stack is higher than the , mark.

%Up to 150 sheets plain paper can be loaded.

%Slide the lateral guides to fit the size of paper to be loaded.

1-54

Page 61
Image 61
321 Studios MFX-C2828 manual Loading paper into the bypass tray