Introduction Chapter 1
1 | Operation precautions | 1.13 |
|
1.13Operation precautions
To ensure the optimum performance of this machine, observe the precautions described below.
Power source
The power source requirements are as follows.
-Voltage fluctuation: Maximum ± 10% (at 110 V/120 to 127 V/220 to 240 V AC)
-Frequency fluctuation: Maximum ± 3 Hz (at 50 Hz/60 Hz)
–Use a power source with as little voltage or frequency fluctuations as possible.
Operating environment
The environmental requirements for correct operation of the machine are as follows.
-Temperature: 50°F (10°C) to 86°F (30°C) with fluctuations of no more than 50°F (10°C) within an hour
-Humidity: 15% to 85% with fluctuations of no more than 10% within an hour
Storage of copies
To store copies, follow the recommendation listed below.
-Copies that are to be kept for a long time should be kept where they are not exposed to light in order to prevent them from fading.
-Adhesive that contains solvent (e.g., spray glue) may dissolve the toner on copies.
-Color copies have a thicker layer of toner than normal
Precaution on transportation
When holding the handle, exercise care not to get your fingers caught between this unit and the handle.
