xxxiiiCM 4000 Installation and Operating Manual
Laser Compliance

Laser Safety Requirements

The device used in this product is a Class 1 certified laser product. Operating this
product outside specifications or altering from its original design may result in haz-
ardous radiation exposure, and may be considered an act of modifying or new
manufacturing of a laser product under U.S. regulations contained in 21CFR Chap-
ter1, subchapter J or CENELEC regulations in HD 482 S1. People performing such
an act are required by law to recertify and reidentify this product in accordance with
provisions of 21CFR subchapter J for distribution within the U.S.A., and in accor-
dance with CENELEC HD 482 S1 for distribution within countries using the IEC
825 standard.

Laser Safety

Laser safety in the United States is regulated by the Center for Devices and Radio-
logical Health (CDRH). The laser safety regulations are published in the “Laser
Product Performance Standard,” Code of Federal Regulation (CFR), Title 21, Sub-
chapter J.
The international Electrotechnical Commission (IEC) Standard 825, “Radiation of
Laser Products, Equipment Classification, Requirements and User’s Guide,” governs
laser products outside the United States. Europe and member nations of the European
Free trade Association fall under the jurisdiction of the Comite European de Normal-
ization Electrotechnique (CENELEC).
For the CDRH: The radiant power is detected trough a 7 mm aperture at a distance of
200 mm from the source focused through a lens with a focal length of 100 mm.
For IEC compliance: The radiant power is detected trough a 7 mm aperture at a dis-
tance of 100 mm from the source focused through a lens with a focal length of 100
mm.