Control Panel Operation CP 3830
6−88 CM 4000 Installation and Operating Manual
CP 3830 Control Panel
Figure 6−119.
COLORBAR
23
45
789
0
6
1
VTR CG NET
VCR CAM SAT
TEST NUMAUX
FILM PATCH STU
Menu
Lock
Prot
Clear
Chop
Take
VIDEO LEFT RIGHT AES1 T/C
CURRENT
PRESET
CP 3830
(For installation and configuration instructions, please see page 2−47.)
The CP 3830 Control Panel is a 12−category,* full−matrix,* multi−level* breakaway* panel, capable of locking,* protect-
ing,* and chopping* outputs. The panel features eight−character display capability and relegendable, lighted push buttons.
The Current display window shows the source switched to the panel’s controlled output. The Preset window shows the new
source as it is being entered from the category and keypad push buttons; after TAKE is pressed, the previous source is shown
in the Preset window. This allows “flip−flopping” the sources, or switching between the current and preset sources by simply
pressing the TAKE button (see page 6−78).
The push buttons are capable of green, red, and amber back lighting, with green generally used to show a selected function
and red to indicate an operational mode in progress. The amber color is presently used only for a CP 3830 dedicated output
panel (see page 5−126).
As an option, the CP 3830 can be operated in connection with an adjacent CP 3809 Expansion Panel (see page 6−124) or a
CP 3810 Expansion Panel (see page 6−126).
Dual CP 3830 panels can be configured so that one of the panels is used as a dedicated output panel (see page 5−126). Dual
output mode is also possible with two panels side by side.
CP 3830P (CP 3830 with Automatic Preview)
The CP 3830 can also be configured to control two outputs, with the second output used for preview. In this mode, the panel
is referred to as a “CP 3830P.” Note: The CP 3830P cannot be operated with an expansion panel.
* Defined in Glossary Section