17−1CM 4000 Installation and Operating Manual
Section 17 − Router Control Utility
Figure 17−1.
This application allows the user to do simple Takes using any control panel input, output and level set in their currently active
set.
Configuration
When you first open the Router Control Utility, you will see the Configure window. You must select an input, output, and
level set. These sets will be used when making switches.
Figure 17−2.
Click on one of each set and then click on OK. The Configure dialog will disappear and the Outputs, Inputs, and Levels lists
in the Router Control window will fill with entries from the selected control panel sets. You can return to the Configure dialog
by selecting the “Configure” command from the Options menu.