3Com CM 4000 - page 368

Control Panel Operation CP 3000
6−16 CM 4000 Installation and Operating Manual
Figure 6−17. Menu selections.
VTR1 VT1L VT1R VT1T
STAT SEQ AUD OUT
VTR1 VT1L VT1R VT1T
DIAG DEF PWD LOG
Page 1
Page 2
VTR1 VT1L VT1R VT1T
ID Page 3
STAT — DISPLAY OUTPUT STATUS
Selecting STATUS permits the operator to review the current status of all levels of the output controlled by the panel.
The operator presses MENU and then the STATUS soft−key. The display prompt line is cleared and the output status prompt
appears. (See Figure 6−18.)
Normally the display status line will display the first four defined output levels. To view the status of other levels associated
with the control panel output, press MORE.
Figure 6−18.
VTR1 VT1L VT1R VT1T
*OUTPUT STATUS*
The operator presses CLEAR or TAKE to exit the status display mode. The display status line returns to the first group of
levels status and the display prompt line returns to the mode it was in when the output status mode was selected.