3Com CM 4000 - page 46

Introduction
1−12 CM 4000 Installation and Operating Manual
CONTROL PANELS
CP 300/310/320/328/330 Control Panels
Connectors:
1, MPK (RS−422/ESbus), looping (9−pin D female)
Power requirements: +5VDC +/− 0.25V @ 600 mA. A wall plug−in power supply is supplied with each 300 series
panel that will be used with 110 VAC 60 Hz power . Panels that are to be used in areas where 220VAC 50Hz power
is the norm are not shipped with any power supply. See page 2−38 for more information.
CP 2002 series control panels
Connectors:
1, MPK (RS−485), looping (RJ45)
1, DC in, Molex Mini−Fit, Jr., 2−pin
Power requirements: 9 VDC / 1.5 A. Use only brick−type power supply, order no. 006 022 811 001 (Euro−plug) or
006 022 811 002 (USA plug)
CP 3000 switcher control panel, MC 3000/3010 machine control panel
Connectors: 1, Data A (RS−422/ESbus), looping (9−pin D female)
Power requirements: +5 VDC§
CP 3010 expansion panel
Connections to main panel (CP 3000 or MC 3000): flat wire bus
Power requirements: +5 VDC§
CP 3020, VC 3020 Push Button Control Panels
Connectors:
1, Data A (RS−422/ESbus), looping (9−pin D female)
1, Remote (for expansion panel) (37−pin D female)
Power requirements: 117/220 VAC, 0.25/0.125 A
CP 3021 Push Button Expansion Panel
Connectors:
1, Input (from CP/MC/VC 3020 main panel) (37−pin D female)
1, Output (to next CP 3021) (37−pin D female)
Power requirements: powered from main panel
Max no. of CP 3021 per main panel: 4
CP 3800 Control Panel
Connectors:
1, MPK (RS−422/ESbus), looping (9−pin D female)
Power requirements: 117/220 VAC, 0.25/0.125 A
§ Furnished by CP 3000/3010 chassis power supply. Power supply requirements: 117/220 VAC, 0.5 /0.25 A.