3M 813 owner manual Data, Control panel buttons high volume printer Button Function

			Operating procedures
DATA	Off		Normal operation. No data being received
			or processed.
	On		The printer is processing data or is
			printing. No data is being received.
	Flashing		The printer is receiving data from or
			sending status information to the host
			computer.
Control panel buttons — high volume printer
Button		Function
PAUSE		Stops and restarts the printing process or removes error
		messages and clears the LCD.
		• If the printer is idle, enters Pause mode immediately.
		• If the printer is printing, the tag is completed before the
		printer pauses.
FEED		Advances a blank tag.
		• If the printer is idle or paused, the tag is fed immediately.
		• If the printer is printing, the tag is fed after printing finishes.
CANCEL		CANCEL functions only in Pause mode. Pressing CANCEL
		once has these effects:
		• Cancels the tag format that is currently printing.
		• If no tag format is printing, the next one to be printed is
		canceled.
		• If no tag formats are waiting to be printed, CANCEL is
		ignored.
		To clear the printer’s entire tag format memory, press and hold
		CANCEL. When the formats are cleared, the DATA light turns
		off.
CALIBRATE		Manual calibration is not required since the 3M printer driver
		provides calibration parameters for the Model 813. For more
		information on manual printer calibration, see the Zebra user
		guide (PDF format, located on the 3M RF Tag Printer Drivers
		CD-ROM).
SETUP/EXIT		Enters and exits Setup mode.
PREVIOUS		When in Setup mode, scrolls the LCD to the previous parameter.
		Press and hold to scroll quickly.
NEXT/SAVE		• When in Setup mode, scrolls the LCD to the next parameter.
		Press and hold to scroll quickly.
		• When exiting Setup mode, saves any changes you have
		made in the configuration and calibration sequence.

Copyright © 2009, 3M. All rights reserved. 13