Safety information
Warnings
To reduce the risk associated with tipping over Model 813 components due to placement on an unsuitable desk or countertop:
•Ensure that the furniture onto which system components are placed is strong enough and provides a low slip surface to safely hold the equipment to prevent tipping or falling.
•Ensure that system installation and operation are performed in accordance with instructions and specifications in this manual and other documentation included with the system.
To reduce risk associated with fire due to incorrect installation of system components: Ensure that system installation and operation are performed in accordance with instructions and specifications in this manual and other documentation included with the system.
To reduce the risk associated with fire due to a user or installer attempting to service system components:
•Do not attempt to modify or repair — no user serviceable parts — contact 3M Service for repair.
•Use approved replacement components, installed by 3M Service personnel only.
•Do NOT alter system power cords, e.g., by replacing power cord plugs to work with local electrical outlets. Purchase power cords locally when factory cords do not work in a particular location.
To reduce the risk associated with hazardous voltage due to a user or installer attempting to service system components:
•Do not attempt to modify or repair — no user serviceable parts — contact 3M Service for repair.
•Use approved replacement components, installed by 3M Service personnel only.
•Do NOT alter system power cords, e.g., by replacing power cord plugs to work with local electrical outlets. Purchase power cords locally when factory cords do not work in a particular location.
Safety labels
See documentation included with Model 813 components.
Printer safety
Printer battery
The main printed circuit board assembly includes a
WARNING Risk of explosion if battery is replaced with an incorrect type.
Note: Recycle batteries according to your local guidelines and regulations.
Shock hazard
WARNING The printer and power supply should never be operated in a location where either one can get wet. Personal injury could result.
2 | Copyright © 2009, 3M. All rights reserved. |
