4.(No Answer state) If you enable the "No Answer" state, in addition to entering a phone number, you must also specify the number of rings for your phone. In the "No. Rings" field, select the number of rings you want your phone to perform before forwarding any incoming calls. Valid values are 1 through 9. Default is 1.
5. Click | to save your changes. The change is dynamic. CFWD is applied to the phone |
immediately. |
|
Note: If you make changes to the configuration for CFWD via the IP Phone UI, you must refresh the Aastra Web UI screen to see the changes.
Configuring CFWD Using the IP Phone UI
IP Phone UI
Use the following procedure to configure CFWD using the IP Phone UI.
Note: If you make changes to the configuration for CFWD via the IP Phone UI, you must refresh the Aastra Web UI screen to see the changes.
1. Press on the phone to enter the Options List.
2.Select Call Forward and press <Enter>.
3..With the account in focus, press Change.
4.Select a Call Forward mode to set on the account (All, Busy, No Answer, All On, All Off) and press Change.
5.Using the DOWN arrow key, scroll to the CFWD State you want to set and press Change.
6.Using the DOWN arrow key, toggle the state ON or OFF as required and press Set.
7.Press the DOWN arrow key to scroll to CFWD Number and press Change.
8.Enter the call forward phone number for the state you are configuring and press Set.
9.(No Answer state) If you enable the "No Answer" state, in addition to entering a phone number, you must also specify the number of rings for your phone.
Using the DOWN arrow key, scroll to No. Rings and press Change. Use the UP and DOWN arrow keys to select the number of rings you want your phone to perform before forwarding any incoming calls. Valid values are 1 through 9. Default is 1.
10.Press Done and then press # to confirm the changes
Managing Calls
Model 6751i IP Phone User Guide | 79 |