Managing Calls

CFWD Account-Based Configuration

Call Forward (CFWD) on the IP phone allows incoming calls to be forwarded to another destination.

You can set CFWD on the phone-side by configuring the account information via the Aastra Web UI at the path Basic Settings->Account Configuration. When configuring CFWD, you can specify one, all , or a combination of call forward states (All, Busy, No Answer) for your phone. You can also specify the CFWD number(s) to use when your phone is in a specific state. When your phone is in a specific state(s), all incoming calls get forwarded to the number you specify.

The following table describes the Message Waiting Indicator (MWI) LEDs when you enable CFWD on the IP Phone.

MWI LED Behavior for All Modes

MWI LED ON if phone has CFWD enabled.

MWI LED OFF if phone has CFWD disabled.

You can also enable and disable CFWD on the phone using the IP Phone UI. In the IP Phone UI, you set CFWD at the path Services->OptionList->Call Forward.

Configuring CFWD Using the Aastra Web UI

Use the following procedure to configure CFWD using the Aastra Web UI.

Aastra Web UI

1. Click on Basic Settings->Account Configuration.

2.In the "Call Forward State" field, enable a state (All, Busy, and/or No Answer) on the phone by checking the box. Disable CFWD state(s) by unchecking the box(es).

3.In the "Number" field for each state that you enable, enter a phone number for the phone to use to call forward any incoming calls when your phone is in that state.

78

Model 6751i IP Phone User Guide

Page 86
Image 86
Aastra Telecom 6751I manual Cfwd Account-Based Configuration, Configuring Cfwd Using the Aastra Web UI