Custom - The Custom mode allows you to configure CFWD for a specific account or all accounts. You can configure a specific state (All, Busy, and/or No Answer) for each account independently or all accounts.On the 6757i CT, you can set all accounts to All On, All Off, or copy the configuration for the account in focus to all other accounts using a CopytoAll softkey.

Note: If there is only one account configured on the phone, then the mode setting is ignored and the phone behaves as if the mode was set to “Phone”.

10.

Click

to save your changes.

 

The changes takes affect immediately without a reboot.

11.

Click on Basic Settings->Account Configuration.

The illustration above shows 3 accounts configured on the phone. Accounts must be set up by your System Administrator.

12.For each account, enable the CFWD state by placing a check mark in one or more of the following “State” fields:

All

Busy

No Answer

The “All” option forwards all incoming calls for this account to the specified phone number regardless of the state of the phone. The phone can be in the Busy or No Answer states, or can be in the idle state. The phone still forwards all calls to the specified number.

The “Busy” option call forwards incoming calls only if the account is in the busy state. The calls are forwarded to the specified phone number.

Managing Calls

Model 6757i CT IP Phone User Guide

197

Page 207
Image 207
Aastra Telecom 6757I CT manual Model 6757i CT IP Phone User Guide 197, Click To save your changes