Getting Started
The 6863i must be set up and configured prior to its first use. This section describes phone behavior and start up screens you may see when the phone is first plugged in, or when it is restarted.
Plugging in and Starting the Phone
The 6863i automatically begins the start up sequence as soon as it is connected. The phone goes through this process the first time you plug in your phone and every time you restart your phone.
Note:
Some start up screens only appear the first time you connect your phone, or if your phone has been factory defaulted.
The phone displays the following startup screens:
Aastra 6863i
Aastra 6863i
LLDP
Aastra 6863i
DHCP
Initializing
network
During the first start up, the 6863i phone attempts to contact the Redirection and Configuration Server (rcs.aas- tra.com) for current server information. No personal information is transmitted from the phone during this process.
Contacting
Redirector
The 6863i phone may also look for configuration servers on your local network (press 4Skip to continue without check- ing for servers).
Auto Discovery
Skip
If appropriate servers are found they are listed for you to select from by scrolling down to view the complete list. (Press 3Skip to continue without selecting a server.).
1 Choose Server
<Server Name>
SkipSelect
6 |
