Machine Maintenance

Machine Disassembly and Replacement

This chapter contains step-by-step procedures on how to disassemble the notebook computer for maintenance and troubleshooting.

Cable paths and positioning may not represent the actual model. During the removal and installation of the components, ensure all available cable channels and clips are used and that the cables are replaced in the same position.

The screws for the different components vary in size. During the disassembly process, group the screws with the corresponding components to avoid mismatch when putting back the components.

The product previews seen in the disassembly procedures may not represent the final product color or configuration.

Recommended Equipment

To disassemble the computer, the following tools are suggested:

Wrist grounding strap and conductive mat for preventing electrostatic discharge Non-marring scribe

Phillips screwdriver Flat-blade screwdriver Plastic flat screwdriver Plastic tweezers Cyanoacrylate glue

Replacement Requirements

NOTE: NOTE:

Cabling and components require adhesive to be applied during the replacement and reassembly process.

Machine Maintenance

3-5

Page 59
Image 59
Acer S3 MS2346 manual Machine Disassembly and Replacement, Recommended Equipment, Replacement Requirements