Acer S3 MS2346 manual Removing the M-SATA Board, Wlan & Mini 1 Cables

Removing the M-SATA Board

1.Perform the “Removing the Lower Case” procedure described on page 3-9.

2.Perform the “Removing the Battery Pack” procedure described on page 3-10.

3.Perform the “Removing the WLAN Module” procedure described on page 3-15.

4.Release the connector latches (1) from the M-SATA board, then disconnect the WLAN & mini 1 cables (2).

Figure 3-52. WLAN & Mini 1 Cables

5. Detach the M-SATA board from the upper case.

Figure 3-53. M-SATA Board

NOTE: NOTE:

A circuit board that is > 10cm2 has been highlighted with a yellow rectangle in Figure 3-53. Follow the local regulations for disposing this type of circuit board.

Machine Maintenance 3-35