Acer S3 MS2346 manual Removing the DC-In Module M-SATA Board, DC-In Cable M-SATA Board

Removing the DC-In Module (M-SATA Board)

1.Perform the “Removing the Lower Case” procedure described on page 3-9.

2.Perform the “Removing the Battery Pack” procedure described on page 3-10.

3.Disconnect the DC-In cable from the M-SATA board & the mainboard (1) then release the DC-In cable from the self adhesive tape securing it (2).

Figure 3-20. DC-In Cable (M-SATA Board)

4. Detach the DC-In socket from the upper case.

Figure 3-21. DC-In

3-18 Machine Maintenance