Agilent Technologies 8922 P manual Earthing ground, incorporated in the power cord. The mains

	intended use of the instrument. Agilent Technologies assumes no
	liability for the customer’s failure to comply with these requirements.
	This is a Safety Class I instrument (provided with a protective
WARNING
	earthing ground, incorporated in the power cord). The mains
	plug shall only be inserted in a socket outlet provided with a
	protective earth contact. Any interruption of the protective
	conductor inside or outside of the instrument is likely to make
	the instrument dangerous. Intentional interruption is
	prohibited.
	DO NOT operate the product in an explosive atmosphere or in the
	presence of flammable gasses or fumes.
	DO NOT use repaired fuses or short-circuited fuseholders: For continued
	protection against fire, replace the line fuse(s) only with fuse(s) of the
	same voltage and current rating and type.
	DO NOT perform procedures involving cover or shield removal unless
	you are qualified to do so: Operating personnel must not remove
	equipment covers or shields. Procedures involving the removal of covers
	and shields are for use by service-trained personnel only.
	DO NOT service or adjust alone: Under certain conditions, dangerous
	voltages may exist even with the equipment switched off. To avoid
	dangerous electrical shock, service personnel must not attempt internal
	service or adjustment unless another person, capable of rendering first
	aid and resuscitation, is present.
	DO NOT operate damaged equipment: Whenever it is possible that the
	safety protection features built into this product have been impaired,
	either through physical damage, excessive moisture, or any other reason,
	REMOVE POWER and do not use the product until safe operation can be
	verified by service-trained personnel. If necessary, return the product to
	an Agilent Technologies Sales and Service Office for service and repair
	to ensure the safety features are maintained.
	DO NOT substitute parts or modify equipment: Because of the danger of
	introducing additional hazards, do not install substitute parts or perform
	any unauthorized modification to the product. Return the product to an
	Agilent Technologies Sales and Service Office for service and repair to
	ensure the safety features are maintained.

vii