Screens
HSCSD screen
6. Call Type
Type
Units
Default
Values
Toggle
None
2x2
2x2 or 2x1
| The Call Type field determines which type of HSCSD call the HP/ |
| Agilent 8922 establishes the next time a call is initiated. |
| If you select 2x1, the HP/Agilent 8922 tries to establish a call with 2 |
| downlinks and 1 uplink when a call is next initiated. The measure |
| timeslot field will no longer be visible, nor will the controls concerned |
| with the second uplink (Slave TX level, Slave input level, Slave |
| input level control mode). |
| If you select 2x2, the HP/Agilent 8922 sets up a call with 2 downlinks |
| and 2 uplinks. The Measure timeslot field appears, along with controls |
| associated with the second uplink. The Measure timeslot field is set to |
| the default for each unit (slave for slave, master for master). |
| Each of these changes is subject to the conditions that a call must not be |
NOTE | |
| in progress when the change to this field is made and that the field will |
| not change if changing the slave timeslot would make it take on an |
| illegal value. |
|
|
Chapter 4 | 31 |
