| Remote operation |
| HSCSD Subsystem GPIB Commands |
| HSCSd:SLAVe:STATus:SYNC |
Description | This |
| synchronised with the master unit. The status is set to DISABLED when |
| you set the instrument type to HSCSD SLAVE. This must be done before |
| configuring the master unit. When the master unit is configured as |
| HSCSD MASTER, a frame reset is sent from the master unit to the slave |
| unit. Upon receiving this reset, the slave unit starts to generate a TCH, |
| and the sync status field changes to ENABLED. |
Syntax | HSCSd:SLAVe:STATus:SYNC? |
Command options | Not applicable. |
56 | Chapter 5 |
