Notices
This document contains propri- etary information that is pro- tected by copyright. All rights are reserved.
No part of this document may reproduced in (including elec- tronic storage and retrieval or translation into a foreign lan- guage) without prior agreement and written consent from Agilent Technologies Deutschland GmbH as governed by United States and international copywright laws.
Copyright 2001 - 2004 by: Agilent Technologies Deutschland GmbH Herrenberger Str. 130 71034 Böblingen Germany
Subject Matter
The material in this document is subject to change without notice.
Agilent Technologies makes no warranty of any kind with regard to this printed material, includ- ing, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
Agilent Technologies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Warranty
This Agilent Technologies instru- ment product is warranted against defects in material and workmanship for a period of one year from date of shipment. Dur- ing the warranty period, Agilent will, at its option, either repair or replace products that prove to be defective.
For warranty service or repair, this product must be returned to a service facility designated by Agi- lent. Buyer shall prepay shipping charges to Agilent and Agilent shall pay shipping charges to return the product to Buyer. How- ever, Buyer shall pay all shipping charges, duties, and taxes for
products returned to Agilent from another country. Agilent warrants that its software and firmware designated by Agilent for use with an instrument will execute its programming instructions when properly installed on that instrument. Agilent does not war- rant that the operation of the instrument, software, or firm- ware will be uninterrupted or error free.
Limitation of Warranty
The foregoing warranty shall not apply to defects resulting from improper or inadequate mainte- nance by Buyer, Buyer-supplied software or interfacing, unautho- rized modification or misuse, operation outside of the environ- mental specifications for the product, or improper site prepara- tion or maintenance.
No other warranty is expressed or implied. Agilent Technologies specifically disclaims the implied warranties of Merchantability and Fitness for a Particular Purpose.
Exclusive Remedies
The remedies provided herein are Buyer’s sole and exclusive reme- dies. Agilent Technologies shall not be liable for any direct, indi- rect, special, incidental, or conse- quential damages whether based on contract, tort, or any other legal theory.
Assistance
Product maintenance agreements and other customer assistance agreements are available for Agi- lent Technologies products. For any assistance contact your near- est Agilent Technologies Sales and Service Office.
Certification
Agilent Technologies Inc. certi- fies that this product met its pub- lished specifications at the time of shipment from the factory. Agi- lent Technologies further certifies that its calibration measurements are traceable to the United States National Institute of Standards and Technology, NIST (formerly the United States National Bureau of Standards, NBS) to the
extent allowed by the Institutes’s calibration facility, and to the cali- bration facilities of other Interna- tional Standards Organization members.
ISO 9001 Certification Produced to ISO 9001 interna- tional quality system standard as part of our objective of continu- ally increasing customer satisfac- tion through improved process control.
Safety Notices
CAUTION
Caution denotes a hazard. It calls attention to a procedure which, if not correctly performed or adhered to, could result in dam- age to or destruction of the prod- uct. Do not proceed beyond a caution sign until the indicated conditions are fully understood and met.
WARNING
Warning denotes a hazard. It calls attention to a procedure which, if not correctly performed or adhered to, could result in injury or loss of life. Do not proceed beyond a warning sign until the indicated conditions are fully understood and met.
The instruction manual symbol. The product is marked with this warning symbol when it is neces- sary for the user to refer to the instructions in the manual.
The laser radiation sym- bol. This warning symbol is marked on products which have a laser out- put.
The AC symbol is used to indicate the required nature of the line module input power.
The ON symbols are used to mark the posi- tions of the instrument power line switch.
The OFF symbols are used to mark the posi-
| tions of the instrument |
| power line switch. |
| The CE mark is a regis- |
| tered trademark of the |
| European Community. |
| The CSA mark is a regis- |
| tered trademark of the |
| Canadian Standards |
| Association. |
| The C-Tick mark is a reg- |
| istered trademark of the |
| Australian Spectrum |
| Management Agency. |
ISM1-A | This text denotes the |
instrument is an Indus- |
| trial Scientific and Medi- |
| cal Group 1 Class A |
| product. |
Typographical Conventions.
The following conventions are used in this book:
Key type for keys or text located on the keyboard or instrument.
Softkey type for key names that are displayed on the instrument’s screen.
Display type for words or charac- ters displayed on the computer’s screen or instrument’s display.
User type for words or characters that you type or enter.
Emphasis type for words or char- acters that emphasize some point or that are used as place holders for text that you type.
Second Edition
86120-90C03 August 2004
First Edition:
86120-90035: February 2000
