Agilent Technologies Agilent 86120C DELTaPOWerSTATe, DELTaPRESet, Syntax, Attribute, Summary

	Programming Commands
	CALCulate3 Subsystem
	DELTa:POWer[:STATe]
	Turns the delta- power measurement mode on and off.
Syntax	:CALCulate3:DELTa:POWer[:STATe]{? {ON OFF 1 0}}
Attribute	Preset State: off
Summary	*RST State: off
	SCPI Compliance: instrument specific
Description	When this state is on, the power of the reference laser line is sub-
	tracted from the power values of all laser lines except the reference.
	The power data returned by the CALC3:DATA? query is the array of
	laser line power levels normalized to the power level of the reference
	laser line. The power of the reference laser line is returned as an
	absolute power (unnormalized). The frequency data returned is the
	array of absolute frequency values.
	Note
	Only one STATe command can be turned on at any one time. Attempting to turn
	more than one state on at a time results in a “–221 Settings Conflict” error. Refer
	to “Measure delta, drift, and signal-to-noise” on page 3-14 for additional informa-
	tion on selecting measurements.
	DELTa:PRESet
	Turns off all delta measurement states.
Syntax	:CALCulate3:DELTa:PRESet
Attribute	Preset State: not affected
Summary	*RST State: not affected
	SCPI Compliance: instrument specific
	Command Only

4-50