Agilent Technologies Agilent 86120C manual HELPHEADers?, Syntax, Attribute, Summary, Description

Programming Commands

SYSTem Subsystem

	HELP:HEADers?
	Queries a listing of all the remote programming commands available
	for the Agilent 86120C.
Syntax	:SYSTem:HELP:HEADers?
Attribute	Preset State: none
Summary	*RST State: none
	SCPI Compliance: instrument specific
	Query Only
Description	The returned ASCII string of commands is in the IEEE 488.2 arbitrary-
	block data format. The first line indicates the total number of bytes
	returned to the computer. That is, the # character is followed by one
	digit which indicates how many of the following digits convey the byte
	count. The next digits give the actual byte count. For example, in the
	listing below, 4387 bytes are indicated in the file.
	Each command in the listing is separated by a linefeed character.
	The following is an example of the first few lines and last few lines
	returned in the string. The term nquery indicates that a command
	cannot be sent as a query. The term qonly indicates that a command
	can only be sent as a query.
	#44387
	:ABORt/nquery/
	:CALCulate:DATA?/qonly/
	:CALCulate:TRANsform:FREQuency:POINts
	:CALCulate1:DATA?/qonly/
	:CALCulate1:TRANsform:FREQuency:POINts
	:CALCulate2:DATA?/qonly/
	.
	.
	.
	*IDN?/qonly/
	*OPC
	*RCL/nquery/
	*RST/nquery/
	*SAV/nquery/
	*SRE
	*STB?/qonly/
	*TRG/nquery/
	*TST?/qonly/
	*WAI/nquery/

4-99