Agilent Technologies Agilent 86120C manual 18. Preset Values, PRESet

Programming Commands

STATus Subsystem

	PRESet
	Presets the enable registers and the PTRansition and NTRansition fil-
	ters.
Syntax	:STATus:PRESet
Attribute	Preset State: none
Summary	*RST State: none
	SCPI Compliance: standard
	Command Only
Description	The PRESet command is defined by SCPI to affect the enable register.
	If you want to clear all event registers and queues, use the *CLS com-
	mand.
	Table 4-18. Preset Values
	Status Node	Preset Value
	Operation enable register	0
	Questionable enable register	0
	PTRansition filters	32767
	NTRansition filters	0
Example
	OUTPUT 720;”:STATUS:PRESET”

4-96