Agilent Technologies E3633A, E3634A manual Execution Errors

Chapter 5 Error Messages

Execution Errors

	Execution Errors
-101	Invalid character
	An invalid character was found in the command string. You may have inserted
	a character such as #, $, or % in the command keyword or within a parameter.
	Example: OUTP:STAT #ON
-102	Syntax error
	Invalid syntax was found in the command string. You may have inserted a blank
	space before or after a colon in the command header, or before a comma.
	Example: VOLT:LEV ,1
-103	Invalid separator
	An invalid separator was found in the command string. You may have used a
	comma instead of a colon, semicolon, or blank space - or you may have used
	a blank space instead of a comma.
	Example: TRIG:SOUR,BUS or APPL 1.0 1.0
-104	Data type error
	The wrong parameter type was found in the command string. You may have
	specified a number where a string was expected, or vice versa.
-105	GET not allowed
	A Group Execute Trigger (GET) is not allowed within a command string.
-108	Parameter not allowed
	More parameters were received than expected for the command. You may
	have entered an extra parameter, or you added a parameter to a command that
	does not accept a parameter.
	Example: APPL? 10
-109	Missing parameter
	Fewer parameters were received than expected for the command. You omitted
	one or more parameters that are required for this command.
	Example: APPL

125

5