Agilent Technologies E3633A, E3634A manual Supplemental Characteristics, Remote Sensing Capability

Chapter 8 Specifications

Supplemental Characteristics

Supplemental Characteristics

Table 1-2.Supplemental Characteristics

Parameter			Agilent E3633A		Agilent E3634A
Output Programming Range		Low Range	0 to +8.24 V/		0 to +25.75 V/
(maximum programmable values)			0 to 20.6 A		0 to 7.21 A
		High Range	0 to +20.6 V/		0 to +51.5V/
			0 to 10.3 A		0 to 4.12 A
		OVP	1 V to 22 V		1 V to 55 V
		OCP	0 A to 22 A		0 A to 7.5 A
Voltage Programming			Full Load	No Load	Full Load	No Load
Speed: Maximum time required
		Up	95 msec	45 msec	80 msec	100 msec
for output voltage to settle within
1% of its total excursion (for		Down	30 msec	450 msec	30 msec	450 msec
resistive load). Excludes
command processing time.
Remote Sensing Capability
Voltage drop	Up to 0.7 V per each lead
Load regulation	Add 5 mV to spec for each 1-volt change in the + output
	lead due to load current changes.
Load voltage	Subtract voltage drop in load leads from specified output
	voltage rating.

Temperature Coefficient, ±(% of output + offset)

Maximum change in output/readback per °C after a 30-minute warm-up

Voltage	0.01% + 3 mV
Current	0.02% + 3 mA

Stability, ±(% of output + offset)

Following 1 hour warm-up, change in output over 8 hours under constant load, line, and ambient temperature

Voltage	0.02% + 1 mV
Current	0.1% + 1 mA

165

8