Agilent Technologies E3634A A command header was received which contained more than the maximum

Chapter 5 Error Messages

Execution Errors

-112	Program mnemonic too long
	A command header was received which contained more than the maximum 12
	characters allowed.
-113	Undefined header
	A command was received that is not valid for this power supply. You may have
	misspelled the command or it may not be a valid command. If you are using
	the short form of the command, remember that it may contain up to four letters.
	Example: TRIGG:DEL 3
-121	Invalid character in number
	An invalid character was found in the number specified for a parameter value.
	Example: *ESE #B01010102
-123	Numeric overflow
	A numeric parameter was found whose exponent was larger than 32,000.
-124	Too many digits
	A numeric parameter was found whose mantissa contained more than 255
	digits, excluding leading zeros.
-128	Numeric data not allowed
	A numeric parameter was received but a character string was expected.
	Example: DISP:TEXT 123
-131	Invalid suffix
	A suffix was incorrectly specified for a numeric parameter. You may have
	misspelled the suffix.
	Example: TRIG:DEL 0.5 SECS
-134	Suffix too long
	A suffix for a numeric parameter contained too many characters.
-138	Suffix not allowed
	A suffix was received following a numeric parameter which does not accept a
	suffix.
	Example: STAT:QUES:ENAB 18 SEC (SEC is not a valid suffix).

126