Manuals / Agilent Technologies / Lawn and Garden / Portable Generator

Agilent Technologies E3633A, E3634A Firmware Revision Query, SCPI Language Version, Systvers?

Models: E3634A E3633A

1 175

Download 175 pages 17.89 Kb

Page 58

Firmware Revision Query

Chapter 3 Front-Panel Operation

System-Related Operations

Firmware Revision Query

The power supply has three microprocessors for control of various internal systems. You can query the power supply to determine which revision of firmware is installed for each microprocessor.

•You can query the firmware revision from the remote interface only.

•The power supply returns four fields separated by commas and the fourth field is a revision code which contains three numbers. The first number is the firmware revision number for the main processor; the second is for the input/output processor; and the third is for the front-panel processor.

•Remote interface operation:

*IDN? Returns ‘‘HEWLETT-PACKARD,E3633A,0,X.X-X.X-X.X’’(E3633A)

‘‘HEWLETT-PACKARD,E3634A,0,X.X-X.X-X.X’’(E3634A)

Be sure to dimension a string variable with at least 40 characters.

SCPI Language Version

The power supply complies with the rules and regulations of the present version of SCPI (Standard Commands for Programmable Instruments). You can determine the SCPI version with which the power supply is in compliance by sending a command from the remote interface.

You can query the SCPI version from the remote interface only.

• Remote interface operation:

SYST:VERS?

Query the SCPI version

Returns a string in the form “YYYY.V” where the “Y’s” represent the year of the version, and the “V” represents a version number for that year (for example, 1996.0).

57

3

Image 58

Agilent Technologies E3633A, E3634A manual Firmware Revision Query, SCPI Language Version, Systvers?

Contents

3DUW1XPEHU $SULO User’s Guide$JLOHQW$DQG$ &3RZHU6XSSOLHV ‹&RS\ULJKW$JLOHQW7HFKQRORJLHV,QF $OO5LJKWV5HVHUYHGConvenient bench-top features Agilent E3633A and E3634A DC Power SuppliesFlexible system features The Front Panel at a Glance For Agilent E3633A Model **For Agilent E3634A Model Front-Panel Voltage and Current Limit Settings Display Annunciators The Rear Panel at a Glance In This Book Page Contents ContentsContents ContentsChapter 4 Remote Interface Reference Contents Execution Errors Self-Test Errors Calibration ErrorsChapter 8 Specifications ContentsContents Output Isolation Multiple Loads Remote Voltage SensingGeneral Information Safety and EMC Requirements Safety ConsiderationsGeneral Information Accessories Options and AccessoriesOptions Description Chapter 1 General Information DescriptionVoltage and current programming Voltage and current readback from the terminals so there is no operator access to the output conductors without Initial Inspection InstallationCooling and Location Chapter 1 General Information Installation Rack Mounting Chapter 1 General Information Installation Power-Line Cord Input Power RequirementsPower-Line Voltage Selection 100 or 115 Vac, 6.3 AT fuse 230 Vac, 3.15 AT fuse Chapter 1 General Information Input Power Requirements Initial Operation Initial Operation Preliminary Checkout Power-On Checkout ADDR 05 or RS-232Output Checkout Voltage Output CheckoutCurrent Output Checkout Output On/Off Display Limit Voltage CurrentPage Chapter 2 Initial Operation Output Checkout Front-Panel Operation Front-Panel Operation Front-Panel Operation Overview Chapter 3 Front-Panel Operation Front-Panel Operation OverviewConstant Voltage Operation preset current limit and the output voltage will drop proportionately Constant Current Operation Display LimitDuring actual CC operation, if a load change causes the voltage limit to be exceeded STORE Storing and Recalling Operating StatesSTORE Store7 Restore the operating state DONERECALL RECALLLEVEL 22.0V E3633A LEVEL 55.0V E3634A Setting the OVP Level and Enable the OVP CircuitProgramming Overvoltage Protection OVP ONCHANGED Checking OVP OperationClearing the Overvoltage Condition OVP CLEAROVP CLEAR Over Voltage Over Voltage Over Voltage Over VoltageFigure 3-1. Recommended Protection Circuit for Battery Charging Chapter 3 Front-Panel Operation Programming Overvoltage ProtectionLEVEL 22.0 A E3633A LEVEL 7.5 A E3634A Setting the OCP Level and Enable the OCP CircuitProgramming Overcurrent Protection OCP ONOCP CLEAR Checking OCP OperationClearing the Overcurrent Condition CHANGEDOCP CLEAR Over Current Over Current Over Current Over CurrentOutput Noise CV RegulationOutput Rating Remote Voltage Sensing at the Front and Rear TerminalsStability Remote Voltage Sensing ConnectionsRemote Voltage Sensing at the Rear Panel Disabling the Output Disabling the Output Using an External Relay Knob LockingSystem-Related Operations Self-TestError Conditions 3 ERRDisplay Control Display the string enclosed in quotesChapter 3 Front-Panel Operation System-Related Operations Firmware Revision QuerySCPI Language Version You can query the firmware revision from the remote interface onlyRemote Interface Configuration Remote Interface SelectionBaud Rate Selection RS-232 GPIB AddressParity Selection RS-232 ADDR To Set the GPIB AddressGPIB CHANGE SAVED9600 To Set the Baud Rate and Parity RS-232RS-232 BAUDI/O Config CHANGE SAVEDGPIB Interface Configuration RS-232 Configuration Overview RS-232 Interface ConfigurationRS-232 Data Frame Format Connection to a Computer or Terminal DTR / DSR Handshake Protocol RS-232 Troubleshooting Calibration Overview Calibration Security000000 CODE SECUREDUNSECURED SECURED UNSECURED000000 CODE Chapter 3 Front-Panel Operation Calibration OverviewChange the security code Unsecure with old codeChapter 3 Front-Panel Operation Calibration Overview Calibration CountCalibration Message CALCOUN?Remote Interface Reference program the power supply Remote Interface ReferenceChapter 4 Remote Interface Reference SCPI Command Summary SCPI Command SummarySCPI First-time SCPI users, see page numeric value DEFault Chapter 4 Remote Interface Reference SCPI Command SummaryOutput Setting and Measurement Commands numeric valueDEFaultSystem-Related Commands Chapter 4 Remote Interface Reference SCPI Command SummaryTriggering Commands TEXTCLEar SYSTem BEEPerIMMediate ERRor? VERSion? OUTPutStatus Reporting Commands Chapter 4 Remote Interface Reference SCPI Command SummaryCalibration Commands CALibration COUNt? CURRentDATA numeric value CURRentLEVel MINMIDMAXIEEE-488.2 Common Commands Chapter 4 Remote Interface Reference SCPI Command SummaryRS-232 Interface Commands SYSTem LOCal REMote RWLockUsing the Low-Level Commands Using the APPLy CommandSimplified Programming Overview Reading a Query Response Selecting a Trigger SourceTable 4-1. Agilent E3633A Programming Ranges Power Supply Programming RangesTable 4-2. Agilent E3634A Programming Ranges APPLy voltage DEF MIN MAX,current DEF MIN MAX Using the APPLy CommandChapter 4 Remote Interface Reference Using the APPLy Command APPLy?Output Setting and Operation Commands This query returns the presently programmed current level of the power supply. CURR? MAX and CURR? MIN return the highest and lowest programmable current levels for the selected range This command sets the current level at which the overcurrent protection OCP circuit will trip. If the peak output current exceeds the OCP level, then the output current is programmed to zero. The Questionable Status register ‘‘OC’’ bit is set see page 103. An overcurrent condition can be cleared with the CURRPROTCLE command after the condition that caused the OCP trip is removed The following program segments show how to use the VOLT UP or VOLTageSTEP? DEFault Output Setting and Operation CommandsVOLTageSTEP numeric valueDEFault Chapter 4 Remote Interface ReferenceThis query returns the overvoltage protection trip level presently programmed. VOLTPROT? MAX and VOLTPROT? MIN return the maximum and minimum programmable overvoltage trip levels This query returns the currently selected range. The returned parameter for the Agilent E3633A is ‘‘P20V’’ HIGH or ‘‘P8V’’ LOW and the parameter for the Agilent E3634A is ‘‘P50V’’ HIGH or ‘‘P25V’’ LOW Triggering Commands Trigger Source ChoicesTo select the immediate trigger source, send the following command Triggering Commands DISPlay OFF ON System-Related CommandsChapter 4 Remote Interface Reference System-Related Commands DISPlay?SYSTemERRor? Chapter 4 Remote Interface Reference System-Related CommandsOUTPREL command +0, ‘‘No error’’This command resets the power supply to its power-on state as follows To recall a stored state, you must use the same memory location used Calibration Commands This command corrects the differential nonlinearity error of the internal DAC without an external meter. You must send this command before calibrating the voltage. It takes about 30 seconds to execute the command This command can only be used after calibration is unsecured and the output state is ON. It sets the power supply to a calibration point that is entered with CALVOLT command. During calibration, three points must be entered and the low-end point MIN must be selected and entered first RS-232 Interface Commands What is an Enable Register? What is an Event Register?The SCPI Status Registers Chapter 4 Remote Interface Reference The SCPI Status Registers SCPI Status SystemBinary Weight 20 = 21 = 22 = 23 = 24 = 25 = 26 = 27 = 28 = 29 = 210 = 211 = 212 = 213 = 214 = 215 =The Questionable Status Register Command Error. A command syntax error occurred see The Standard Event RegisterExecution Error. An execution error occurred see error Power On. Power has been turned off and on since theChapter 4 Remote Interface Reference The SCPI Status Registers The Status Byte RegisterThe Standard Event Enable register is cleared when The Standard Event register is cleared whenUsing Service Request SRQ and Serial POLL Using the Message Available Bit MAV Using *STB? to Read the Status ByteTo Interrupt Your Bus Controller Using SRQ To Determine When a Command Sequence is Completed Using *OPC to Signal When Data is in the Output BufferSYSTemERRor? Status Reporting CommandsChapter 4 Remote Interface Reference Status Reporting Commands STATusQUEStionableCONDition?This command clears all event registers and Status Byte register SRE? Chapter 4 Remote Interface Reference Status Reporting Commands PSC?STB? TRIGgered currentMINMAX TRIGgered?MINMAX VOLTage voltageMINMAXUPDOWN An Introduction to the SCPI LanguageSOURce CURRent currentMINMAXUPDOWN CURRent? MINMAX CURRent VOLTage? MINMAX VOLTage TRIGgered voltageMINMAX TRIGgered? MINMAXCommand Format Used in This Manual Command Separators Using the MIN and MAX ParametersSCPI Command Terminators Querying Parameter SettingsIEEE-488.2 Common Commands SCPI Parameter Types Halting an Output in Progress SCPI Confirmed Commands SCPI Conformance InformationChapter 4 Remote Interface Reference SCPI Conformance Information Chapter 4 Remote Interface Reference SCPI Conformance Information SCPI Confirmed Commands continuedSOURce VOLTageLEVelIMMediateAMPLitude voltageMINMAXUPDOWN STRing quoted string STRing? APPLy voltageDEFMINMAX,currentDEFMINMAX APPLy?SECureCODE new code SECureSTATe OFFON,code SECureSTATe? OUTPut RELaySTATe OFFON RELaySTATE?IEEE-488 Conformance Information Error Messages 3 ERR Error MessagesStore Execution Errors A command header was received which contained more than the maximum particular element received was not valid for the header executed due to the current device state data is lost Self-Test Errors Calibration Errors Chapter 5 Error Messages Calibration Errors Application Programs This chapter contains two application programs over the remote interface to help you develop programs for your own application. Chapter 4, “Remote Interface Reference,” starting on page 73, lists the syntax for the SCPI Standard Commands for Programmable Instruments commands available to program the power supply Application ProgramsDiode.c Example Program for C and C++Chapter 6 Application Programs Example Program for C and C++ Continued on next page 135Chapter 6 Application Programs Example Program for C and C++ Continued on next page 136Continued on next page 137 Chapter 6 Application Programs Example Program for C and C++strcatVISAaddress,GPIBAddress strcatVISAaddress,INSTR Chapter 6 Application Programs Example Program for C and C++ void CheckErrorchar* pMessageif ErrorStatus VISUCCESS printf\n %s,pMessage ClosePort exit0 End of Program 138Example Example Program for ExcelChapter 6 Application Programs Example Program for Excel program resultTo write an Excel macro you must first open a module in Excel. Go to the View menu, choose Toolbars, and then select Control Toolbox. The Control Toolbox dialog box appears. Select the Command button in the dialog box. Click cell A1 and drag across the cell B3. The “CommandButton1” box is created. To change the button name, click the right mouse button on that button and then select Properties. The Properties dialog box appears. In the Properties dialog, change the “name” and “caption” to “Diode”. To try the example for characterizing a diode, type “Voltages” in cell A4 and “Current” in cell B4. In cell A5 type 0.6. Fill in the cells A5 to A15 in 0.02 increments so that cell A15 contains Chapter 6 Application Programs Example Program for Excel Diode Macro Continued on next page 141Chapter 6 Application Programs Example Program for Excel Dim commandString As StringEnd of Program 142 Declaration for Windows 95/NT Chapter 6 Application Programs Example Program for ExcelDeclaration for Windows This routine requires the file VISA.dll. It typically resides in theChapter 6 Application Programs Example Program for Excel 144 Tutorial Output Characteristics, starting on page TutorialOverview of Agilent E3633A and Agilent E3634A Operation Figure 7-1. Diagram of Simple Series Power SupplyOPTICAL ISOLATION POWER SUPPLY OUTPUTCONTROL DISPLAY Output Characteristics Chapter 7 Tutorial Output CharacteristicsFigure 7-5. Output Characteristics Unwanted Signals Unregulated StateSources of Noise Figure 7-6. Simplified Diagram of Common Mode and Normal ModeE3633A E3634A Output Isolation Connecting the LoadMultiple Loads Remote Voltage Sensing Figure 7-7. Regulated Power Supply with Remote SensingLoad Consideration Chapter 7 Tutorial Connecting the Load Reverse Current Loading Series Connections Extending the Voltage and Current RangeParallel Connections Remote Programming Figure 7-8. Speed of Response - Programming Up Full LoadFigure 7-9. Speed of Response - Programming Down Reliability Chapter 7 Tutorial ReliabilitySpecifications Specifications Chapter 8 Specifications Performance Specifications Performance SpecificationsTable 1-1. Performance Specifications OVP and OCP Accuracy, ±% of output + offset Remote Sensing Capability Supplemental CharacteristicsChapter 8 Specifications Supplemental Characteristics Temperature Coefficient, ±% of output + offsetSCPI Standard Commands for Programmable Instruments 20 to 70 C for storage environment Chapter 8 Specifications Supplemental Characteristics 168 Index IndexIndex IndexIndex Indexoutput programming range 165 output ratings Index Index Uweight of power supply 167 wire rating wires sizes unregulated state condition 151 up-programming responseCopyright 1998 Agilent Technologies All Rights Reserved DECLARATION OF CONFORMITY according to ISO/IEC Guide 22 and EN